Project: Highstrung [AKA. Walletbreaker]

PrpnNightmare · 29th June 2012, 2:57 PM

Okay OCAU, here's the deal. I'm about to get a little bit nutty with my tiny TJ08-E, and I thought I'd come share the madness here.

If you take a peek at my sig, you'll see there's a decent amount of power packed into this tiny mATX, but not enough. The current plan is to replace my GTX680 with a GTX690, replace my AX650 with an AX850, and then, get wet.

I'll be sticking a Magicool 180mm rad in the front, and an XSPC EX120 in the rear, and here's a peek at my current PCCG cart.

Stay tuned for more to come, mainly, the excretion of my wallet.

sugaris · 29th June 2012, 4:52 PM

in your order you have the GTX 690 water block but your sig says you have a GTX 680...

xRdawGz · 29th June 2012, 5:33 PM

Quote:

Originally Posted by sugaris

in your order you have the GTX 690 water block but your sig says you have a GTX 680...

He said he's wanting to replace the 680 with a 690.

BigDave · 29th June 2012, 6:44 PM

Some help for you mate

http://forums.overclockers.com.au/sh...82&postcount=7

m3k · 30th June 2012, 4:19 AM

i say drop the silver and keep copper only loop with liquid utopia-

From my reading that's the best combination at the moment, to avoid corrosion and growth :/ feel free to correct me

PrpnNightmare · 1st July 2012, 12:25 PM

Quote:

Originally Posted by BigDave

Some help for you mate

http://forums.overclockers.com.au/sh...82&postcount=7

Thanks for that mate

Quote:

Originally Posted by m3k

i say drop the silver and keep copper only loop with liquid utopia-

From my reading that's the best combination at the moment, to avoid corrosion and growth :/ feel free to correct me

Thanks for the suggestion. This is my first balls out water loop, so I'll definitely look into it. I haven't read alot on liquid utopia, but had the prior knowledge that some silver would set me good. Thanks

PrpnNightmare · 2nd July 2012, 3:25 PM

Going to get everything in and going on air first. Money is tight for the next 2 weeks, so I don't wanna overreach and be left hurting for it. Next stop is a GTX690 and AX850.

Hood · 2nd July 2012, 3:40 PM

anti kink coils <- not required and look kinda fugly.

whats wrong with the AX 650 PSU? its more than powerful enough for your build then some!

3/8-5/8 tubing will suit a matx build a lot better.

Huggy_Bear64 · 2nd July 2012, 4:59 PM

Piss off the silver and the anti kink. Get smaller tube.
I might also suggest a D5 pump if you can fit it. I have one of those DDCs and they're noisy little fuckers.

Also buy from GAMmods if you can, PCCG have a shit range and crap prices.
TKR is also worth a look, especially if you want more range with your waterblocks (or any GPU waterblocks for your GPU).

29th June 2012, 2:57 PM	#1
PrpnNightmare Member Join Date: Feb 2010 Location: 3807, Victoria. Posts: 38	Project: Highstrung [AKA. Walletbreaker] Okay OCAU, here's the deal. I'm about to get a little bit nutty with my tiny TJ08-E, and I thought I'd come share the madness here. If you take a peek at my sig, you'll see there's a decent amount of power packed into this tiny mATX, but not enough. The current plan is to replace my GTX680 with a GTX690, replace my AX650 with an AX850, and then, get wet. I'll be sticking a Magicool 180mm rad in the front, and an XSPC EX120 in the rear, and here's a peek at my current PCCG cart. Stay tuned for more to come, mainly, the excretion of my wallet. __________________ - Current Rig - i7 3820 - 16GB G.Skill Ripjaws Z - GTX Titan - Xonar Essence STX - 2x F830 256GB SSD - 1TB WD Black - HX1000W Nebula Painted & Sleeved - Raven RV02-E

29th June 2012, 4:52 PM	#2
sugaris Member Join Date: May 2002 Location: Townsville Posts: 335	in your order you have the GTX 690 water block but your sig says you have a GTX 680... __________________ Come to the Dark Side... We Have Cookies...

29th June 2012, 6:44 PM	#4
BigDave Member Join Date: Nov 2007 Location: ADELAIDE/5018 Posts: 2,391	Some help for you mate http://forums.overclockers.com.au/sh...82&postcount=7 __________________ Main: - CM690 II,ASUS P8Z68-V PRO,2500K@4.5,16g-G.Skill1600,SLI GTX580,1x120g SSD,1x300g VR,1x640Gb,1x1Tb,LG 27",G19: Under water Server:- TJO8-E, Asock Z77 Pro-4M, i3-2130@3.4,8g-G.Skill 1600, GTX260,1x64Gb ssd, 8x2Tb,Under Water

2nd July 2012, 3:25 PM	#7
PrpnNightmare Member Join Date: Feb 2010 Location: 3807, Victoria. Posts: 38	Going to get everything in and going on air first. Money is tight for the next 2 weeks, so I don't wanna overreach and be left hurting for it. Next stop is a GTX690 and AX850. __________________ - Current Rig - i7 3820 - 16GB G.Skill Ripjaws Z - GTX Titan - Xonar Essence STX - 2x F830 256GB SSD - 1TB WD Black - HX1000W Nebula Painted & Sleeved - Raven RV02-E

2nd July 2012, 3:40 PM	#8
Hood Member Join Date: Apr 2008 Location: Hoth Posts: 569	anti kink coils <- not required and look kinda fugly. whats wrong with the AX 650 PSU? its more than powerful enough for your build then some! 3/8-5/8 tubing will suit a matx build a lot better. __________________ Caselabs STH10 build Paracord Tool

30th June 2012, 4:19 AM	#5
m3k Member Join Date: Dec 2007 Posts: 520	i say drop the silver and keep copper only loop with liquid utopia- From my reading that's the best combination at the moment, to avoid corrosion and growth :/ feel free to correct me

2nd July 2012, 4:59 PM	#9
Huggy_Bear64 Member Join Date: Apr 2010 Location: Melbourne, VIC, 3127 Posts: 2,507	Piss off the silver and the anti kink. Get smaller tube. I might also suggest a D5 pump if you can fit it. I have one of those DDCs and they're noisy little fuckers. Also buy from GAMmods if you can, PCCG have a shit range and crap prices. TKR is also worth a look, especially if you want more range with your waterblocks (or any GPU waterblocks for your GPU). __________________ Purple Raven 2600k @ 4.6GHz - Maximus IV Extreme-Z - 16GB 1600MHz CL9 - CrossFire HD6970 - 120GB SSD - Asus Essence STX - Corsair AX650 - Silverstone RV02 Last edited by Huggy_Bear64; 2nd July 2012 at 5:02 PM.