My 9600 says LE ???

mercho · 2nd November 2005, 7:37 AM

Hey Guys...
I have a 256mb 9600 that says it is a 9600LE on the tag...
I have looked at ATI's site and the have an SE but no LE.
The reason i am asking is that i am looking at an ATI silencer but they say they only fit XT PRO and SE.
Any info on my card would be great

Ignignort · 2nd November 2005, 7:45 AM

There wasn't a LE made, check in your display properties too see what it is.

The silencer will be fine

edit: Sorry my mistake, didnt have to time have a look properly this morning.

groovetek · 2nd November 2005, 8:31 AM

there WAS an LE - it's a good card... it's kinda like a non-pro... still has 128bit bus, but lower clock speeds.

edit: finding a silencer to fit it may be difficult because all these low-end radeon 9xxx series had all sorts of pcb layouts from different manufacturers...

look up some pictures of 9600 pros and stuff - if it looks the same as your card then it should fit fine...

or... save yourself the trouble and get this or something:
http://www.pccasegear.com.au/prod1812.htm

SLATYE · 2nd November 2005, 12:31 PM

The only LE cards I remember were exactly the same as 9600 non-Pro cards (clocks were 325Mhz core and 400Mhz RAM).

I agree with Groovetek's suggestion - just get a VF-700AlCu (because they fit almost anything that has mounting holes).

2nd November 2005, 7:37 AM	#1
mercho Member Join Date: May 2004 Location: Bathurst, NSW Posts: 1,500	My 9600 says LE ??? Hey Guys... I have a 256mb 9600 that says it is a 9600LE on the tag... I have looked at ATI's site and the have an SE but no LE. The reason i am asking is that i am looking at an ATI silencer but they say they only fit XT PRO and SE. Any info on my card would be great

2nd November 2005, 7:45 AM	#2
Ignignort Member Join Date: Nov 2004 Location: Hobart,Tasmania Posts: 1,748	There wasn't a LE made, check in your display properties too see what it is. The silencer will be fine edit: Sorry my mistake, didnt have to time have a look properly this morning. __________________ PSN: Ignignortx XBL: Ignig Last edited by Ignignort; 2nd November 2005 at 8:42 AM.

2nd November 2005, 8:31 AM	#3
groovetek Member Join Date: Oct 2003 Location: SE Melbourne, 3150 Posts: 2,971	there WAS an LE - it's a good card... it's kinda like a non-pro... still has 128bit bus, but lower clock speeds. edit: finding a silencer to fit it may be difficult because all these low-end radeon 9xxx series had all sorts of pcb layouts from different manufacturers... look up some pictures of 9600 pros and stuff - if it looks the same as your card then it should fit fine... or... save yourself the trouble and get this or something: http://www.pccasegear.com.au/prod1812.htm __________________ DNA Tuning (Australia) Last edited by groovetek; 2nd November 2005 at 8:33 AM.

2nd November 2005, 12:31 PM	#4
SLATYE SLATYE, not SLAYTE Join Date: Nov 2002 Location: Canberra Posts: 25,832	The only LE cards I remember were exactly the same as 9600 non-Pro cards (clocks were 325Mhz core and 400Mhz RAM). I agree with Groovetek's suggestion - just get a VF-700AlCu (because they fit almost anything that has mounting holes). __________________ Main system: Phenom II X4 920 \| 8GB (4x 2GB) DDR2-800 \| Gigabyte M57SLI-S4 v2.0 \| Leadtek Geforce 9600GSO 384MB \| Enermax Modu82+ 525W \| 1TB Hitachi HDD \| 3.5" + 5.25" FDD Laptop: Compal EL80 \| C2D T7200 \| 320GB Fujistu HDD \| 2GB DDR2-667 \| GF Go 7600