Brass M3 hexagon screw available?

trodas · 1st March 2008, 11:37 AM

I was astonished when I was told that brass M3x10 mm screw WITH hexagon head is not even made - much less available to buy - at least in Czech republic.

Screws M3x10mm and even from brass are not a problem, as long, as the head is round, pan or cheese - just like it is pictured there:
http://www.mech.uwa.edu.au/DANotes/t...tro/heads.jpeg

But one of my "genial" designs are extremly hard to diassembly AND assembly using these heads, so I would love to get my hands on like 10 pcs of such screws. The key words is M3, brass made and with the hexagon head.

My simple question is this - are screws like this made anywhere in the world, or the rest of the world also "did not have them" at all...?

Glock · 2nd March 2008, 2:18 PM

Getting one that's 10mm long might be even harder than what you're looking for, but have you considered cutting down some standoffs?

trodas · 6th March 2008, 8:36 AM

Well, as long as the screw is M3, brass and with hexagon head and have the thread all the way up - I can cut anything

But I just searching if such screw are available somewhere in this damn limiting world

For sure it is not available in Czech republic.

1st March 2008, 11:37 AM	#1
trodas Member Join Date: Sep 2004 Location: Czech republic Posts: 442	Brass M3 hexagon screw available? I was astonished when I was told that brass M3x10 mm screw WITH hexagon head is not even made - much less available to buy - at least in Czech republic. Screws M3x10mm and even from brass are not a problem, as long, as the head is round, pan or cheese - just like it is pictured there: http://www.mech.uwa.edu.au/DANotes/t...tro/heads.jpeg But one of my "genial" designs are extremly hard to diassembly AND assembly using these heads, so I would love to get my hands on like 10 pcs of such screws. The key words is M3, brass made and with the hexagon head. My simple question is this - are screws like this made anywhere in the world, or the rest of the world also "did not have them" at all...? __________________ "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire ...just keep folding, just keep folding... my config - my caps Last edited by trodas; 1st March 2008 at 11:44 AM.

2nd March 2008, 2:18 PM	#2
Glock Member Join Date: Oct 2006 Posts: 1,248	Getting one that's 10mm long might be even harder than what you're looking for, but have you considered cutting down some standoffs? __________________ White P!!! NINTENDO™ DS Lite Owners Club Member #0060

6th March 2008, 8:36 AM	#3
trodas Member Join Date: Sep 2004 Location: Czech republic Posts: 442	Well, as long as the screw is M3, brass and with hexagon head and have the thread all the way up - I can cut anything But I just searching if such screw are available somewhere in this damn limiting world For sure it is not available in Czech republic. __________________ "It is dangerous to be right in matters on which the established authorities are wrong." - Voltaire ...just keep folding, just keep folding... my config - my caps