Unlocking my xp1800+

Brendan_ · 14th July 2002, 12:37 PM

Point me in the right direction as for guides and articles and add your own advise if you feel nesessary

thanx
Also can anyone tell me how the stepping AGOGA rates as an overclocker because u havent been able to get above 1.7 stabe..

its 02/02 so week 2

Brendan_ · 14th July 2002, 2:44 PM

Bravo... God... where are you 2? ... lol i needur wisdom and guidence

Bravo · 14th July 2002, 2:55 PM

Im in the middle of writing an article.

Its difficult to explain without pictures.

Brendan_ · 14th July 2002, 4:55 PM

well hit me with some shabby paint diagrams lol
when ur ready of course i aint in a rush

Bravo · 14th July 2002, 4:58 PM

Quote:

Originally posted by Brendan_
well hit me with some shabby paint diagrams lol
when ur ready of course i aint in a rush

Just give me two weeks, it will be highly detailed.

nutty · 15th July 2002, 1:45 AM

i might not be the god that Bravo is but i did mine
Toms Hardware Guide have a search over there and u learn alot i got the video but they make it look easy

accelenation
has one

Google

btw dont think it will take 5min
leave plenty of time

BTW: i recomend not smoking b4 keep those nerves steady

Brendan_ · 15th July 2002, 10:56 AM

hmmmm im fine with putiing the conductive paste over the briges but what u do b4 that to stop the grooves conducting... im not so good on lol. The article i saw used silicon thermal paste and a big drop of it over the bridges. But that stuff is a pain in the arse to clean up! it never comes off lol

nutty · 15th July 2002, 11:23 AM

well i used super glue
let it dry for 15min and then did the bridges

kukulkan · 18th July 2002, 4:05 PM

I have purchased the same product from CoolPC to unlock my 1800+. I just purchased a large magnifying glass (desk mount) to unlock the chip this weekend.
I was planning on using selleys no more nails, toothpicks, a scalpel, sticky tape and tweezers to do the job of filling the gap. Anyone had any experiences using nomore nails to fill it?

http://www.3dvelocity.com/reviews/xpunlock/xpunlock.htm is the best unlocking tutorial ive seen sofar.

willz · 18th July 2002, 4:19 PM

well i used liquid paper..

14th July 2002, 12:37 PM	#1
Brendan_ Member Join Date: Mar 2002 Location: NSW, near Penrith/Richmond Posts: 813	Unlocking my xp1800+ Point me in the right direction as for guides and articles and add your own advise if you feel nesessary thanx Also can anyone tell me how the stepping AGOGA rates as an overclocker because u havent been able to get above 1.7 stabe.. its 02/02 so week 2 Last edited by Brendan_; 14th July 2002 at 12:59 PM.

15th July 2002, 1:45 AM	#6
nutty Member Join Date: Feb 2002 Location: brisbane.queensland.au Posts: 1,687	i might not be the god that Bravo is but i did mine Toms Hardware Guide have a search over there and u learn alot i got the video but they make it look easy accelenation has one Google btw dont think it will take 5min leave plenty of time BTW: i recomend not smoking b4 keep those nerves steady __________________ My s15 200sx![/size]

15th July 2002, 11:23 AM	#8
nutty Member Join Date: Feb 2002 Location: brisbane.queensland.au Posts: 1,687	well i used super glue let it dry for 15min and then did the bridges __________________ My s15 200sx![/size]

14th July 2002, 2:44 PM	#2
Brendan_ Member Join Date: Mar 2002 Location: NSW, near Penrith/Richmond Posts: 813	Bravo... God... where are you 2? ... lol i needur wisdom and guidence

14th July 2002, 2:55 PM	#3
Bravo Member Join Date: Jun 2001 Location: Brisbane, Australia Posts: 10,051	Im in the middle of writing an article. Its difficult to explain without pictures.

14th July 2002, 4:55 PM	#4
Brendan_ Member Join Date: Mar 2002 Location: NSW, near Penrith/Richmond Posts: 813	well hit me with some shabby paint diagrams lol when ur ready of course i aint in a rush

15th July 2002, 10:56 AM	#7
Brendan_ Member Join Date: Mar 2002 Location: NSW, near Penrith/Richmond Posts: 813	hmmmm im fine with putiing the conductive paste over the briges but what u do b4 that to stop the grooves conducting... im not so good on lol. The article i saw used silicon thermal paste and a big drop of it over the bridges. But that stuff is a pain in the arse to clean up! it never comes off lol

18th July 2002, 4:05 PM	#9
kukulkan Member Join Date: Aug 2001 Location: Perth, Western Australia Posts: 3,032	I have purchased the same product from CoolPC to unlock my 1800+. I just purchased a large magnifying glass (desk mount) to unlock the chip this weekend. I was planning on using selleys no more nails, toothpicks, a scalpel, sticky tape and tweezers to do the job of filling the gap. Anyone had any experiences using nomore nails to fill it? http://www.3dvelocity.com/reviews/xpunlock/xpunlock.htm is the best unlocking tutorial ive seen sofar.

18th July 2002, 4:19 PM	#10
willz Member Join Date: Mar 2002 Location: Melbourne Posts: 818	well i used liquid paper..