Overclockers Australia Forums

OCAU News - Wiki - QuickLinks - Pix - Sponsors  

Go Back   Overclockers Australia Forums > Specific Hardware Topics > Memory

Notices


Sign up for a free OCAU account and this ad will go away!
Search our forums with Google:
Reply
 
Thread Tools
Old 31st July 2017, 12:57 PM   #1
mrjayviper Thread Starter
Member
 
Join Date: Jul 2012
Posts: 330
Default registered ECC DDR3 sticks: do they get hot compared to desktop counterparts?

I was looking for RAM for an Intel server board and I came across a Hynix one with the word "HOT" in the heat spreader. I know desktop RAMs also comes with heat spreader but I've never seen them carrying a similar warning.

My only experience with server RAM is from an old Apple Mac Pro which uses FBDIMM and they also also carry the same warning.

I've looked at eBay and there are server RAM with and without heat spreaders.

just wondering if heat spreaders are a necessity for server RAM?

Thanks

edit: added pics. The samsung sticks (at least according to my search) are the low powered versions 1.35V instead of 1.5V)



__________________
"We donít need you to type at all. We know where you are. We know where youíve been. We can more or less know what youíre thinking about." - Google Chairman Eric Schmidt (circa 2010)

Last edited by mrjayviper; 3rd August 2017 at 8:15 PM.
mrjayviper is offline   Reply With Quote

Join OCAU to remove this ad!
Old 31st July 2017, 8:44 PM   #2
Tommo_Aus
Member
 
Tommo_Aus's Avatar
 
Join Date: Aug 2003
Location: Adelaide
Posts: 823
Default

I run 16gb ddr3 ecc modules and they all have heat spreaders, made the mistake of gong to remove one immediately after powering down the server... they burn.
__________________
Tompool - a 2% fee multi-cryptocoin mining pool
Successful trades: Far too many
Server #1: ASUS KGPE-D16, 2x Opteron 6276, 208GB RAM Server #2: 2x Xeon L5639, 192GB RAM Server #3: Dell T410, 2x Xeon X5650, 128GB RAM My PC: i5 3570K @ 4.4ghz, 8GB RAM Mining stuff: Too much
Tommo_Aus is offline   Reply With Quote
Old 1st August 2017, 9:04 AM   #3
Matthew kane
Member
 
Join Date: Jan 2014
Location: Melbourne
Posts: 792
Default

You'd generally find all DDR3 or DDR2 ECC Registered modules bigger than 2GB will have heatspreaders, they run much hotter than desktop RAM because they have more circuitry on the actual RAM module pcb.
__________________
Intel i7 3960X @ 4.7GHZ - Noctua NH-D14 | 16GB OCZ Platinum Series DDR3 1600MHZ | Asus Rampage IV Extreme (4901 bios) | Zotac AMP! Edition GTX 980 Ti | PNY GTX 465 unlocked to 470 | Creative X-Fi Titanium Fatality Pro with LME47920's opamps | OCZ Vertex 3 240GB | OCZ Vertex Plus 120GB| 1TB WD Black, 2TB WD Green, 4 x 2TB Seagate LP | Enermax Revolution 85+ 1250watt | Antec P280 + Veris Elite | LG BD Rewriter
Matthew kane is offline   Reply With Quote
Old 1st August 2017, 1:10 PM   #4
terrastrife
Member
 
terrastrife's Avatar
 
Join Date: Jun 2006
Location: ADL/SA The Monopoly State
Posts: 18,064
Default

fully buffered ram with the buffer gets hot, hence heat spreaders. non buffered ecc doesn't.
terrastrife is offline   Reply With Quote
Old 1st August 2017, 5:27 PM   #5
tensop
Member
 
Join Date: Mar 2002
Posts: 1,180
Default

fbdimm ddr2 gets silly hot, most ecc ddr3 registered i see don't have heatsinks - 1/2/4/8/16/32's
tensop is offline   Reply With Quote
Old 1st August 2017, 7:24 PM   #6
Matthew kane
Member
 
Join Date: Jan 2014
Location: Melbourne
Posts: 792
Default

Depends on the density of the modules.

2Rx4 modules almost always tend to have heatsinks due to the larger array of chips on both sides and the larger amount of heat they put off.

Old school FB DDR2 put off a stinking amount of heat (old technology), I can't remember the amount of times I burnt myself by changing the ram out of old HP DL380 and Dell Poweredge 2950 servers.
__________________
Intel i7 3960X @ 4.7GHZ - Noctua NH-D14 | 16GB OCZ Platinum Series DDR3 1600MHZ | Asus Rampage IV Extreme (4901 bios) | Zotac AMP! Edition GTX 980 Ti | PNY GTX 465 unlocked to 470 | Creative X-Fi Titanium Fatality Pro with LME47920's opamps | OCZ Vertex 3 240GB | OCZ Vertex Plus 120GB| 1TB WD Black, 2TB WD Green, 4 x 2TB Seagate LP | Enermax Revolution 85+ 1250watt | Antec P280 + Veris Elite | LG BD Rewriter
Matthew kane is offline   Reply With Quote
Old 1st August 2017, 8:19 PM   #7
terrastrife
Member
 
terrastrife's Avatar
 
Join Date: Jun 2006
Location: ADL/SA The Monopoly State
Posts: 18,064
Default

Quote:
Originally Posted by Matthew kane View Post
Depends on the density of the modules.

2Rx4 modules almost always tend to have heatsinks due to the larger array of chips on both sides and the larger amount of heat they put off.

Old school FB DDR2 put off a stinking amount of heat (old technology), I can't remember the amount of times I burnt myself by changing the ram out of old HP DL380 and Dell Poweredge 2950 servers.
Chip count means nothing. FB DIMMs have the buffer on the DIMM which is why they have the heat spreader. non FB DIMMs have the buffer on the chipset/IMC which is why they don't have heat spreaders.
terrastrife is offline   Reply With Quote
Old 1st August 2017, 9:28 PM   #8
Matthew kane
Member
 
Join Date: Jan 2014
Location: Melbourne
Posts: 792
Default

Quote:
Originally Posted by terrastrife View Post
Chip count means nothing. FB DIMMs have the buffer on the DIMM which is why they have the heat spreader. non FB DIMMs have the buffer on the chipset/IMC which is why they don't have heat spreaders.
By chip count I'm talking about the entire IC's across the dimm of FB/registered memory, taking in count with the buffer in the centre of the dimm module. Not in relation to desktop or non buffered 2Rx4/8 memory, since we are talking about ECC registered memory here.
__________________
Intel i7 3960X @ 4.7GHZ - Noctua NH-D14 | 16GB OCZ Platinum Series DDR3 1600MHZ | Asus Rampage IV Extreme (4901 bios) | Zotac AMP! Edition GTX 980 Ti | PNY GTX 465 unlocked to 470 | Creative X-Fi Titanium Fatality Pro with LME47920's opamps | OCZ Vertex 3 240GB | OCZ Vertex Plus 120GB| 1TB WD Black, 2TB WD Green, 4 x 2TB Seagate LP | Enermax Revolution 85+ 1250watt | Antec P280 + Veris Elite | LG BD Rewriter
Matthew kane is offline   Reply With Quote
Old 2nd August 2017, 9:33 AM   #9
terrastrife
Member
 
terrastrife's Avatar
 
Join Date: Jun 2006
Location: ADL/SA The Monopoly State
Posts: 18,064
Default

Quote:
Originally Posted by Matthew kane View Post
By chip count I'm talking about the entire IC's across the dimm of FB/registered memory, taking in count with the buffer in the centre of the dimm module. Not in relation to desktop or non buffered 2Rx4/8 memory, since we are talking about ECC registered memory here.
You can get unbuffered ECC RAM with loads of chips and no heat spreader, like so.
http://www.avadirect.com/32GB-2-x-16...roduct/8746833
The buffer is the only chip that matters, even if the DIMM only has a single bank of chips.
terrastrife is offline   Reply With Quote
Old 3rd August 2017, 9:20 AM   #10
ae00711
Member
 
ae00711's Avatar
 
Join Date: Apr 2013
Posts: 1,029
Default

FB-DDR2 (ECC+REG) ram, by JEDEC standards, *must* have a heatspreader!

yes, FB-DDR2 gets that hot. The two rigs that I used to own with FBDDR2 had Hynix with the same caution stamped into the heat spreaders. I ran a hardware monitor app... the sticks idled at ~55-60C
I never ran the rigs without a 120x38mm 3Krpm fan pointing directly at the ram.

FB-DDR2 is the only RAM I am aware of that must have a heat spreader.
__________________
WTB: Logitech G700 / G700s
I LOVE CHING LIU

SMOKING IS UN-AUSTRALIAN
I prefer email to PM!

ae00711 is online now   Reply With Quote
Old 3rd August 2017, 8:11 PM   #11
mrjayviper Thread Starter
Member
 
Join Date: Jul 2012
Posts: 330
Default

pics added

Also plenty of server RAM @ natex.us without heat spreaders
__________________
"We donít need you to type at all. We know where you are. We know where youíve been. We can more or less know what youíre thinking about." - Google Chairman Eric Schmidt (circa 2010)
mrjayviper is offline   Reply With Quote
Old 3rd August 2017, 9:13 PM   #12
Doc-of-FC
Member
 
Doc-of-FC's Avatar
 
Join Date: Aug 2001
Location: Canberra
Posts: 2,691
Default

depends if it's 1.5 or 1.35 volts.

got several servers with 192GB DDR3L ECC with no heat spreaders.

my e3 v3 xeon uses unbuffered DDR3L also.
Doc-of-FC is online now   Reply With Quote
Old 3rd August 2017, 9:40 PM   #13
mrjayviper Thread Starter
Member
 
Join Date: Jul 2012
Posts: 330
Default

Quote:
Originally Posted by Doc-of-FC View Post

my e3 v3 xeon uses unbuffered DDR3L also.
are you saying the Samsung sticks (the one without heatspreaders in the pics) are unbuffered? If yes, how do you know?

Thanks!
__________________
"We donít need you to type at all. We know where you are. We know where youíve been. We can more or less know what youíre thinking about." - Google Chairman Eric Schmidt (circa 2010)
mrjayviper is offline   Reply With Quote
Old 3rd August 2017, 11:15 PM   #14
Matthew kane
Member
 
Join Date: Jan 2014
Location: Melbourne
Posts: 792
Default

Quote:
Originally Posted by terrastrife View Post
You can get unbuffered ECC RAM with loads of chips and no heat spreader, like so.
http://www.avadirect.com/32GB-2-x-16...roduct/8746833
The buffer is the only chip that matters, even if the DIMM only has a single bank of chips.
I'm well aware that you can buffered sticks without heatsinks. But a vast majority of registered ecc DDR2 and DDR3 (not 1.35v) that are sold online (mostly ebay) are from server pulls and generally all have heatsinks. As mentioned above JEDEC standards require registered ddr2 to have a heatsink and they get stinking hot, early ddr3 (non 1.8v) also have heatsinks.

You also have to understand that every generation of RAM requires less supply voltage (DDR2 - 1.8v, DDR3 - 1.35-1.65v, DDR4 - 1.2v) and due to the constant advancement/development and manufacture of IC technology they use less power and put off lower amounts of thermal heat dissipation, they may or may not require heatsinking.

The ddr4 link you provided is not really a good example since we are talking about ddr3 here, I would not be surprised at all if all buffered/registered ecc DDR4 don't require a heatsink. They require a lower supply voltage, use less and newer parts which consume less power and current draw and put off less heat.

Also all DDR2 and maybe 90% of DDR3 manufactured by hynix for OEM partners (IBM, Dell and HP) all require to have heatsinks and come with heatsinks. I've only seen Elpida and Samsung modules without heatsinks but they are also not the primary RAM supplier for some of the biggest OEM manufacturers in the world.
__________________
Intel i7 3960X @ 4.7GHZ - Noctua NH-D14 | 16GB OCZ Platinum Series DDR3 1600MHZ | Asus Rampage IV Extreme (4901 bios) | Zotac AMP! Edition GTX 980 Ti | PNY GTX 465 unlocked to 470 | Creative X-Fi Titanium Fatality Pro with LME47920's opamps | OCZ Vertex 3 240GB | OCZ Vertex Plus 120GB| 1TB WD Black, 2TB WD Green, 4 x 2TB Seagate LP | Enermax Revolution 85+ 1250watt | Antec P280 + Veris Elite | LG BD Rewriter

Last edited by Matthew kane; 3rd August 2017 at 11:17 PM.
Matthew kane is offline   Reply With Quote
Reply

Bookmarks

Sign up for a free OCAU account and this ad will go away!

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 1:33 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
OCAU is not responsible for the content of individual messages posted by others.
Other content copyright Overclockers Australia.
OCAU is hosted by Micron21!