Overclockers Australia Forums

OCAU News - Wiki - QuickLinks - Pix - Sponsors  

Go Back   Overclockers Australia Forums > Manufacturer-specific Forums > Intel x86 CPUs and chipsets

Notices


Sign up for a free OCAU account and this ad will go away!
Search our forums with Google:
Reply
 
Thread Tools
Old 20th May 2017, 4:42 PM   #721
Ratzz
Member
 
Ratzz's Avatar
 
Join Date: Mar 2013
Location: Cheltenham East 3192
Posts: 4,852
Default

Quote:
Originally Posted by Virtuoso X View Post
thanks for the clarification guys
whats a good method of clamping down the IHS to the PCB after applying silicon? i dont have a delid tool etc

I also don't have a relid tool. I use a 3D printed delid tool (MortarArt sells them for <$20) to delid.

For relidding, I have a modified $3 Officeworks clipboard. I've shortened it simply because it didn't need to be so long, and cut a hole in it for the circuits at the bottom of the chip to sit in so it sits flat.


Click to view full size!


The clamp is only a medium pressure, doesn't need to be particular strong. I actually chose it because the large clamp and medium pressure make it a lot easier than a more powerful clipboard clamp. I simply lift the clamp, slide the CPU+IHS under it until it drops into the hole, and gently let it close. 20 minutes is sufficient time for bathroom silicon to get sufficient grab to install on a board.


Click to view full size!
__________________
I always say 'morning' rather than 'good morning'. If it was a 'good' morning then I would be on a yacht in the West Indies smoking a 10" reefer and getting a massage from Lexa Doig...

My Rig
Ratzz is offline   Reply With Quote

Join OCAU to remove this ad!
Old 20th May 2017, 5:05 PM   #722
Virtuoso X
Member
 
Virtuoso X's Avatar
 
Join Date: Jul 2010
Location: Melbourne
Posts: 302
Default

Quote:
Originally Posted by Ratzz View Post
I also don't have a relid tool. I use a 3D printed delid tool (MortarArt sells them for <$20) to delid.

For relidding, I have a modified $3 Officeworks clipboard. I've shortened it simply because it didn't need to be so long, and cut a hole in it for the circuits at the bottom of the chip to sit in so it sits flat.

pix

The clamp is only a medium pressure, doesn't need to be particular strong. I actually chose it because the large clamp and medium pressure make it a lot easier than a more powerful clipboard clamp. I simply lift the clamp, slide the CPU+IHS under it until it drops into the hole, and gently let it close. 20 minutes is sufficient time for bathroom silicon to get sufficient grab to install on a board.

pix
haha genius! thank you!
__________________
X V Rig: i7 2700k 5.1Ghz @ 1.48v 24/7 | Asus Maximus IV Extreme ROG! | Ripjaws X 16GB 2133mhz | H100 | WD Blacks 4TB Vertex 3 240GB SSD | Phanteks Enthro Luxe | 1.2kW StriderGold | RX580
Gear: G9X | G15 | G35 | SCARAB /X V
Virtuoso X is offline   Reply With Quote
Old Yesterday, 8:04 PM   #723
Shags
Member
 
Join Date: Jul 2004
Location: Melbourne
Posts: 1,631
Default

Anyone in Melbourne able to delid mine for a fee? The temps are shooting from 30c ambient to 95 under load whilst @ 5100.
__________________
Quote:
Originally Posted by thetron View Post
Also his SMS speak was terrible and hard guy to understand that you need the internet to translate!
Shags is offline   Reply With Quote
Old Yesterday, 8:35 PM   #724
Ratzz
Member
 
Ratzz's Avatar
 
Join Date: Mar 2013
Location: Cheltenham East 3192
Posts: 4,852
Default

Quote:
Originally Posted by Shags View Post
Anyone in Melbourne able to delid mine for a fee? The temps are shooting from 30c ambient to 95 under load whilst @ 5100.
Where are you? I can help you out, I'm in 3192.
__________________
I always say 'morning' rather than 'good morning'. If it was a 'good' morning then I would be on a yacht in the West Indies smoking a 10" reefer and getting a massage from Lexa Doig...

My Rig
Ratzz is offline   Reply With Quote
Old Yesterday, 9:32 PM   #725
Shags
Member
 
Join Date: Jul 2004
Location: Melbourne
Posts: 1,631
Default

Quote:
Originally Posted by Ratzz View Post
Where are you? I can help you out, I'm in 3192.
3806 - great thanks I'll PM
__________________
Quote:
Originally Posted by thetron View Post
Also his SMS speak was terrible and hard guy to understand that you need the internet to translate!
Shags is offline   Reply With Quote
Old Yesterday, 9:45 PM   #726
nCrypt
Member
 
nCrypt's Avatar
 
Join Date: Feb 2010
Location: Melbourne
Posts: 1,233
Default

Quote:
Originally Posted by Shags View Post
3806 - great thanks I'll PM
def take ratz up on his offer, he did my 2nd 7700K and my 7350K for me!

There is a video of me doing it it somewhere in this thread.!
__________________
1.5960X@4.5Ghz 1.25V WC X99 ROG R5 E10 32GB TridentZ 3200C14 GTX1080 Ti SLI WC CaseLabs S8
2.7700K@5Ghz 1.30V WC Z270 ROG APEX 16GB TridentZ 3200C14 GTX1080 STRIX OC WC Phanteks Luxe Tempered
3.7600K@5Ghz 1.31V H115i Z270 ROG STRIX 16GB TridentZ 3200C14 HD630 Caselabs S8
nCrypt is offline   Reply With Quote
Reply

Bookmarks

Sign up for a free OCAU account and this ad will go away!

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +10. The time now is 12:36 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
OCAU is not responsible for the content of individual messages posted by others.
Other content copyright Overclockers Australia.
OCAU is hosted by Micron21!