Has anyone used the built-in VPN client to connect to work (using Cisco equipment)?

papelboyl1 · 27th June 2012, 11:34 PM

Work hasn't released the latest cisco client that will work with OSX Lion so I searched the net and found a guide that lets me use the built-in one to connect to work.

I am connect at the moment and I got a new interface called utun0 and it even has an IP number that's I know is from work.
---------
utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
inet 129.96.140.165 --> 129.96.140.165 netmask 0xffffff00
--------

But when I try to ssh or ping one of the servers, well I can't access it.

Does anyone know of an alternative to VPN client I can use? or maybe I need to set something so I can use the built-in client?

thanks

sp00nfed · 28th June 2012, 9:44 PM

I used the inbuilt VPN client to connect to Uni last year (They had Cisco 5540 as the end point). It was ridiculously simple to use, entered the details and it'd connect and route traffic without issue.

I'd check to see if there are any additional routes being added when you connect.

f3n1x · 28th June 2012, 11:47 PM

Quote:

Originally Posted by sp00nfed

I'd check to see if there are any additional routes being added when you connect.

This.

Use:

Code:

netstat -r

Dogo · 1st July 2012, 12:40 AM

Try Shimo

Or if you aren't afraid of the terminal, try vpnc and you'll possibly need to install tuntap as well unless your existing config has already setup that interface.

I was using Shimo on my old MBP, now I use vpnc to connect to my work's Cisco VPN , it works great.

Clippit · 2nd July 2012, 7:15 PM

Have I used the built in VPN client? Yes.

27th June 2012, 11:34 PM	#1
papelboyl1 (Banned or Deleted) Join Date: Jan 2012 Location: southern Adelaide 5163 Posts: 137	Has anyone used the built-in VPN client to connect to work (using Cisco equipment)? Work hasn't released the latest cisco client that will work with OSX Lion so I searched the net and found a guide that lets me use the built-in one to connect to work. I am connect at the moment and I got a new interface called utun0 and it even has an IP number that's I know is from work. --------- utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 inet 129.96.140.165 --> 129.96.140.165 netmask 0xffffff00 -------- But when I try to ssh or ping one of the servers, well I can't access it. Does anyone know of an alternative to VPN client I can use? or maybe I need to set something so I can use the built-in client? thanks Last edited by papelboyl1; 27th June 2012 at 11:38 PM.

1st July 2012, 12:40 AM	#4
Dogo Member Join Date: Jul 2005 Location: Melb Posts: 831	Try Shimo Or if you aren't afraid of the terminal, try vpnc and you'll possibly need to install tuntap as well unless your existing config has already setup that interface. I was using Shimo on my old MBP, now I use vpnc to connect to my work's Cisco VPN , it works great. __________________ Gaming Rig: Asrock Z68 Ex4 Gen3 \| 2500k @ 4.6ghz \| 8gb ram \| GTX580 @ 960mhz \| Titanium HD \| H80 Cooler \| Logi G15 K/b \| Logi G500 mouse \| ATH-AD700 'phones \| F/Design Define R3 \| 2x Noctua NF-P14 fans Everyday laptop: Macbook Pro 13" late 2011 2.4GHz i5 \| 4gb ram \| 120gb SSD

2nd July 2012, 7:15 PM	#5
Clippit Member Join Date: Sep 2003 Location: Dreary Outpost (Tasmania) Posts: 2,893	Have I used the built in VPN client? Yes. __________________ Eat recycled food. It's good for the environment and ok for you.

28th June 2012, 9:44 PM	#2
sp00nfed Member Join Date: Jun 2006 Posts: 100	I used the inbuilt VPN client to connect to Uni last year (They had Cisco 5540 as the end point). It was ridiculously simple to use, entered the details and it'd connect and route traffic without issue. I'd check to see if there are any additional routes being added when you connect.