OCAU HWBOT TEAM THREAD Ver2 - Page 162

partybear · 9th May 2012, 9:33 PM

I'll set it up after this comp and see if I can get it to not be crap with some help from you guys. But yeah that board gets alot of praise but it just pissed me off lol.

snappy1 · 9th May 2012, 11:04 PM

I found this xmp settings table in cpu-z tools section for the Patriot 1600llk

I have never seen nearly 5 year old ddr3 with a xmp setting of 2284 mhz 10-10-10-29 2 T , anyone know what ic's these would be?

I initially thought DDR3 microns, but they didn't have this kind of headroom

Chaffe · 9th May 2012, 11:15 PM

My guess would be Micron D9GTR sticks.

From a quick search the other likely possibility would be samsung (earlier variants of HCFO).

bob(nz) · 9th May 2012, 11:55 PM

Dont know if you use it - but the ramlist at i4memory can be very useful

only listing for 1600llk is a 3x2gb kit - saying micron D9JNL's

The real question is can you get them running at that speed using 1.9V

snappy1 · 10th May 2012, 7:35 PM

Quote:

Originally Posted by bob(nz)

The real question is can you get them running at that speed using 1.9V

Not on the ep45T, small chance with my REX under some cold, Z77 no probrem, unless it's imc is junk

aussie-revhead · 10th May 2012, 8:02 PM

Quote:

Originally Posted by partybear

I have alot of trouble getting my ep45t extreme to play nice with ram, thats way better then mine would do.

I have a pair of Cell Shock D9GTR's sitting here doing nothing ..... they might play nice with your EP45T ....

snappy1 · 10th May 2012, 8:21 PM

Quote:

Originally Posted by aussie-revhead

I have a pair of Cell Shock D9GTR's sitting here doing nothing ..... they might play nice with your EP45T ....

If they are the same imc's as my Patriots they will def play nice, 1900+ 7-7-7-20 stock volts, I managed to find another set of the patriots, hope they are as sweet, cost me 4gb of DDR2

mcleotg · 10th May 2012, 8:31 PM

Just posted up a WTB (Link)

If you guys have any of that gear feel free to post it up

Ando420 · 10th May 2012, 10:43 PM

Hey snappy - you keen for a bench soon man?

I have heaps of CPU's and RAM to bench lol plus F1 pot, RAM pot and NB pot.

Will be keen in the next month or so

PLUS I need you to have a play with my Extreme/960 setup and see if you can work out whats up with it dropping a RAM slot

I have a UD4 and 930 thats not to bad but not prepped for cold.

What boards do you have ready for cold in X58 and 775?

Edit: I can bring DICE for when Ln2 runs out - im keen to bench for a few days lol Or you could even come up for a night like last time in the next week or so and then we will plan a big few days.

aussie-revhead · 10th May 2012, 10:45 PM

Quote:

Originally Posted by mcleotg

Just posted up a WTB (Link)

If you guys have any of that gear feel free to post it up

I have your ram here too mate.

mcleotg · 10th May 2012, 11:12 PM

Quote:

Originally Posted by aussie-revhead

I have your ram here too mate.

That was faster than I expected

Did I give you enough to cover postage?

My laptop just started artifacting. Looks like it will be another week without ivy

snappy1 · 11th May 2012, 10:42 PM

Quote:

Originally Posted by Ando420

Hey snappy - you keen for a bench soon man?

I have heaps of CPU's and RAM to bench lol plus F1 pot, RAM pot and NB pot.

Will be keen in the next month or so

PLUS I need you to have a play with my Extreme/960 setup and see if you can work out whats up with it dropping a RAM slot

I have a UD4 and 930 thats not to bad but not prepped for cold.

What boards do you have ready for cold in X58 and 775?

Edit: I can bring DICE for when Ln2 runs out - im keen to bench for a few days lol Or you could even come up for a night like last time in the next week or so and then we will plan a big few days.

Nothing prepped atm, but the EP45T will be, should have Ivy by the time we meet up

I have a few idea's about fixing your extreme.....

Do you need a 775 mobo?

soz for the late reply....

kazen · 12th May 2012, 5:22 PM

just as a show of hands, if i was to consider making a kingpincooling order, would anyone be interested in going in with me?

jjjc_93 · 12th May 2012, 5:31 PM

The stuff is pretty heavy, so postage to Australia and then postage again within Australia to send it out would probably counter balance any savings we get in shipping from Vince. I could be wrong though.

I'll be ordering a Tek-9 Fat soon though.

kazen · 12th May 2012, 5:40 PM

this is probably true.

9th May 2012, 11:04 PM	#2417
snappy1 Member Join Date: Feb 2008 Location: Benching Posts: 3,807	I found this xmp settings table in cpu-z tools section for the Patriot 1600llk I have never seen nearly 5 year old ddr3 with a xmp setting of 2284 mhz 10-10-10-29 2 T , anyone know what ic's these would be? I initially thought DDR3 microns, but they didn't have this kind of headroom __________________ Go Extreme with the OCAU HWBOT Team G Skill Competition Last edited by snappy1; 9th May 2012 at 11:09 PM.

9th May 2012, 11:15 PM	#2418
Chaffe Member Join Date: Aug 2010 Location: Holeceston Posts: 940	My guess would be Micron D9GTR sticks. From a quick search the other likely possibility would be samsung (earlier variants of HCFO). __________________ Join the OCAU HWbot team "There is nothing good or bad but thinking makes it so" Last edited by Chaffe; 9th May 2012 at 11:19 PM.

9th May 2012, 11:55 PM	#2419
bob(nz) Member Join Date: Feb 2002 Location: Somewhere is SE Asia Posts: 569	Dont know if you use it - but the ramlist at i4memory can be very useful only listing for 1600llk is a 3x2gb kit - saying micron D9JNL's The real question is can you get them running at that speed using 1.9V __________________ *Trusted Traders: Over 300 Successful trades on OCAU - PM me for details* Proud member of http://teamau.net

10th May 2012, 10:43 PM	#2424
Ando420 Member Join Date: Jun 2007 Location: Newcastle Posts: 990	Hey snappy - you keen for a bench soon man? I have heaps of CPU's and RAM to bench lol plus F1 pot, RAM pot and NB pot. Will be keen in the next month or so PLUS I need you to have a play with my Extreme/960 setup and see if you can work out whats up with it dropping a RAM slot I have a UD4 and 930 thats not to bad but not prepped for cold. What boards do you have ready for cold in X58 and 775? Edit: I can bring DICE for when Ln2 runs out - im keen to bench for a few days lol Or you could even come up for a night like last time in the next week or so and then we will plan a big few days. __________________ Go Extreme with the OCAU HWBOT Team G Skill Competition ! Join HWBOT TEAM OCAU Last edited by Ando420; 10th May 2012 at 10:53 PM.

12th May 2012, 5:31 PM	#2429
jjjc_93 Member Join Date: Jul 2009 Location: Perth Posts: 973	The stuff is pretty heavy, so postage to Australia and then postage again within Australia to send it out would probably counter balance any savings we get in shipping from Vince. I could be wrong though. I'll be ordering a Tek-9 Fat soon though. __________________ OCAU HWBOT TEAM Go Extreme with the OCAU HWBOT Team G Skill Competition

9th May 2012, 9:33 PM	#2416
partybear Member Join Date: Jun 2011 Posts: 211	I'll set it up after this comp and see if I can get it to not be crap with some help from you guys. But yeah that board gets alot of praise but it just pissed me off lol.

12th May 2012, 5:22 PM	#2428
kazen (Banned or Deleted) Join Date: Sep 2011 Location: 3147 Posts: 751	just as a show of hands, if i was to consider making a kingpincooling order, would anyone be interested in going in with me?

12th May 2012, 5:40 PM	#2430
kazen (Banned or Deleted) Join Date: Sep 2011 Location: 3147 Posts: 751	this is probably true.