OCAU HWBOT TEAM THREAD Ver2 - Page 170

mcleotg · 5th June 2012, 1:33 AM

I'm selling my X58A-UD5, is anyone interested? Jack managed to hit 252bclk on it and it is already insulated

t8y · 5th June 2012, 5:04 PM

noticed a 1/3rd HP Kayl SS is up for sale atm.
Perth though.

wouldnt be ideal on Ivy as suggested in the thread, better suited to SB/SB-E, 775 (?) but you all know that.

or a slightly more extreme than normal gaming rig

scotteee · 5th June 2012, 5:28 PM

Quote:

Originally Posted by t8y

noticed a 1/3rd HP Kayl SS is up for sale atm.
Perth though.

wouldnt be ideal on Ivy as suggested in the thread, better suited to SB/SB-E, 775 (?) but you all know that.

or a slightly more extreme than normal gaming rig

Hey T8Y,

this used to be my unit i purchased off Kayl years ago, it's great little unit, very nice build quality and i think good for about -40!

I was about to buy it back after 3years but pulled out due to going LN2

aussie-revhead · 5th June 2012, 5:37 PM

Quote:

Originally Posted by t8y

noticed a 1/3rd HP Kayl SS is up for sale atm.
Perth though.

wouldnt be ideal on Ivy as suggested in the thread, better suited to SB/SB-E, 775 (?) but you all know that.

or a slightly more extreme than normal gaming rig

Another one in Sydney listed here.

jjjc_93 · 5th June 2012, 11:27 PM

Selling off a heap of my older benching gear guys, just won't have the time to put any of it to good use anymore so it's time for it to go to somebody who can. The money will also fuel part of my MOA APAC qualifiers run.

http://forums.overclockers.com.au/sh....php?t=1034725

MDewMadOScar · 6th June 2012, 12:24 PM

Quote:

Originally Posted by jjjc_93

Selling off a heap of my older benching gear guys, just won't have the time to put any of it to good use anymore so it's time for it to go to somebody who can. The money will also fuel part of my MOA APAC qualifiers run.

http://forums.overclockers.com.au/sh....php?t=1034725

All the 775 gear I need to get me started for 775

snappy1 · 6th June 2012, 7:45 PM

Finally have the net and electricity connected at the same time

Scores have been updated in the comp thread, sorry everyone

Who deserves best effort in the comp?

GeneralDeath · 6th June 2012, 7:49 PM

no worries Snappy all good mate it would of near on killed me no net or power lol

snappy1 · 6th June 2012, 7:50 PM

Quote:

Originally Posted by GeneralDeath

no worries Snappy all good mate it would of near on killed me no net or power lol

Don't remind me

Winners please contact me with deets

GeneralDeath · 6th June 2012, 7:59 PM

well managed to get to have a quick play and just to really see what this board was capable of Blck wise at first was really struggling to get 105 and 107. Then bam just out of the blue to this just on water.
[IMG]

Click to view full size![/IMG]

Gigabyte Z77X-UD3H got a lot more work too do yet and a lot of settings to tweak. quite impressed my self

jjjc_93 · 6th June 2012, 8:07 PM

Told you guys Ivy and Z77 could do 110+ on water.

I see you've got Xtreem LV 2400 sticks, I have a kit myself and think they're pretty awesome. 2800 capable on air.

Nice to see you back Snappy!

GeneralDeath · 6th June 2012, 8:25 PM

yeah JJJC scored them from XS a while back two sets of 8GB kits and to be honest my fav ram sticks (not that I have many yet lol) at the moment damm what Voltage u pumping into them to get 2800 out of them and timings if u don't mind sharing that is.
They even go hard on my BDozer set up not been able to get them to run at spec though as the UD7 board starts playing up at around 240 bus speed, also equals quite a high clock then.
But for money wise I am quite happy with the UD3H a nice board I think for initial lay out.

SniperOZ · 6th June 2012, 8:35 PM

Quote:

Originally Posted by snappy1

Finally have the net and electricity connected at the same time

Scores have been updated in the comp thread, sorry everyone

Who deserves best effort in the comp?

Good to see you back Snappy

, well done everyone,

I'll put Kazen up for best effort, he pushed for the hole 3 weeks, well done mate

.......... i'm thinking this should be over in the comp thread, hay

Mustang68 · 6th June 2012, 8:36 PM

Quote:

Originally Posted by SniperOZ

Good to see you back Snappy

, well done everyone,

I'll put Kazen up for best effort, he pushed for the hole 3 weeks, well done mate

.......... i'm thinking this should be over in the comp thread, hay

I also agree, I didn't compete, but have been following the comp, and he was consistently trying to improve

jjjc_93 · 6th June 2012, 8:43 PM

Quote:

Originally Posted by GeneralDeath

yeah JJJC scored them from XS a while back two sets of 8GB kits and to be honest my fav ram sticks (not that I have many yet lol) at the moment damm what Voltage u pumping into them to get 2800 out of them and timings if u don't mind sharing that is.
They even go hard on my BDozer set up not been able to get them to run at spec though as the UD7 board starts playing up at around 240 bus speed, also equals quite a high clock then.
But for money wise I am quite happy with the UD3H a nice board I think for initial lay out.

Can boot in on the 2800 multiplier with 1.86v vdimm @ 10-12-12-20 1T 130 TRFC, for 32m stable I need 1.9v and even then it can fail at times. Have a play with your IMC and VTT volts when you're up that high too, I'm sure I got a little more stability by going up a bit when I passed 2700.

5th June 2012, 5:04 PM	#2537
t8y Member Join Date: May 2002 Location: SA, 5108 Posts: 2,905	noticed a 1/3rd HP Kayl SS is up for sale atm. Perth though. wouldnt be ideal on Ivy as suggested in the thread, better suited to SB/SB-E, 775 (?) but you all know that. or a slightly more extreme than normal gaming rig __________________ get cold in cairns! 2013 edition Put that overclocked PC to use - bench it for the OCAU HWBot Team! Over a decade of successful trades on OCAU Last edited by t8y; 5th June 2012 at 5:07 PM.

5th June 2012, 11:27 PM	#2540
jjjc_93 Member Join Date: Jul 2009 Location: Perth Posts: 1,017	Selling off a heap of my older benching gear guys, just won't have the time to put any of it to good use anymore so it's time for it to go to somebody who can. The money will also fuel part of my MOA APAC qualifiers run. http://forums.overclockers.com.au/sh....php?t=1034725 __________________ OCAU HWBOT TEAM Go Extreme with the OCAU HWBOT Team G Skill Competition

6th June 2012, 7:45 PM	#2542
snappy1 Member Join Date: Feb 2008 Location: Benching Posts: 3,866	Finally have the net and electricity connected at the same time Scores have been updated in the comp thread, sorry everyone Who deserves best effort in the comp? __________________ Go Extreme with the OCAU HWBOT Team G Skill Competition

6th June 2012, 8:07 PM	#2546
jjjc_93 Member Join Date: Jul 2009 Location: Perth Posts: 1,017	Told you guys Ivy and Z77 could do 110+ on water. I see you've got Xtreem LV 2400 sticks, I have a kit myself and think they're pretty awesome. 2800 capable on air. Nice to see you back Snappy! __________________ OCAU HWBOT TEAM Go Extreme with the OCAU HWBOT Team G Skill Competition

6th June 2012, 7:49 PM	#2543
GeneralDeath Member Join Date: Sep 2011 Posts: 420	no worries Snappy all good mate it would of near on killed me no net or power lol

6th June 2012, 7:59 PM	#2545
GeneralDeath Member Join Date: Sep 2011 Posts: 420	well managed to get to have a quick play and just to really see what this board was capable of Blck wise at first was really struggling to get 105 and 107. Then bam just out of the blue to this just on water. [IMG] Click to view full size![/IMG] Gigabyte Z77X-UD3H got a lot more work too do yet and a lot of settings to tweak. quite impressed my self

6th June 2012, 8:25 PM	#2547
GeneralDeath Member Join Date: Sep 2011 Posts: 420	yeah JJJC scored them from XS a while back two sets of 8GB kits and to be honest my fav ram sticks (not that I have many yet lol) at the moment damm what Voltage u pumping into them to get 2800 out of them and timings if u don't mind sharing that is. They even go hard on my BDozer set up not been able to get them to run at spec though as the UD7 board starts playing up at around 240 bus speed, also equals quite a high clock then. But for money wise I am quite happy with the UD3H a nice board I think for initial lay out.