Case Mod Project: "M A Y H E M" ....FINISHED TODAY!! - Page 2

Spyfox · 5th June 2012, 8:40 AM

subbed
love your work. big fan

mnpctech · 5th June 2012, 9:22 AM

@SpyFox, Thank you very much!

Quote:

Originally Posted by BigDave

Fark me!!! Bill you've betled this outta the park AGAIN!!!!!!!!

edit: Whats happened to the Mob Bros site??

Thank you Dave! and It's gone. Everyone has migrated to facebook.

Nomad360 · 5th June 2012, 9:47 AM

Sweet rig mate! Can't wait to see the final result! Should do any keen Dirt fan well! :P

BigDave · 5th June 2012, 5:00 PM

Quote:

Originally Posted by mnpctech

@SpyFox, Thank you very much!

Thank you Dave! and It's gone. Everyone has migrated to facebook.

Any idea where Surfer Joe went?

mnpctech · 6th June 2012, 12:57 AM

@Nomad, good to hear from you as well! Thank you

@Dave, spoke with him week ago, in middle of remodeling his kitchen... Do you want his email? He would love hearing from you...

I couldn't help myself, just file these in folder labeled "Doesn't serve purpose, but looks tits"

Drawing inspiration from K&N race series street rod manifold pipes... except these will be mounted like bent "stacks" that will peek out from the rear of chassis..

I've modified pipe from bathroom sink trap I found in Plumbing section at Home depot...

made manifold mount from Blue transparent acrylic, I was lucky to get handful of these red anodized 6/32 machine screws from Twizted old online store, Dragonmodz.. which is now closed.., but You can get anodized machine screws from Parts-Express, http://www.fastener-express.com/

Kitler · 6th June 2012, 10:36 AM

Insane stuff. Love it!

Madengineer · 6th June 2012, 10:51 AM

That is just......Incredible!

BigDave · 6th June 2012, 11:26 AM

Quote:

Originally Posted by mnpctech

@Nomad, good to hear from you as well! Thank you

@Dave, spoke with him week ago, in middle of remodeling his kitchen... Do you want his email? He would love hearing from you...

I couldn't help myself, just file these in folder labeled "Doesn't serve purpose, but looks tits"

image

Drawing inspiration from K&N race series street rod manifold pipes... except these will be mounted like bent "stacks" that will peek out from the rear of chassis..

image

I've modified pipe from bathroom sink trap I found in Plumbing section at Home depot...

image

image

image

image

image

made manifold mount from Blue transparent acrylic, I was lucky to get handful of these red anodized 6/32 machine screws from Twizted old online store, Dragonmodz.. which is now closed.., but You can get anodized machine screws from Parts-Express, http://www.fastener-express.com/

image

Thanks Bill that would be great

Please PM it to me

mnpctech · 6th June 2012, 10:33 PM

@Kitler, Thank you for the post!

@Madengineer, Thank you for tuning in!

@Dave, had to send friend request, before I can PM

House of Kolor paint under the sunlight.... This is a Shimrin Metajuls Basecoat with Orange tangerine Kandy...

Mickatroid · 7th June 2012, 12:40 AM

For what it's worth the switch circuit made me panic for a moment because of the way ground is connected but it is for the LED I would guess. For anyone working with a SPDT switch (which also has three connectors) that is not how to wire it

mnpctech · 7th June 2012, 11:56 PM

Correct, Toggle I'm using has LED. I just discovered some parts are on back order, so I'm having to ask for deadline extension and wait on finishing some stages.

I installed our polished Machined aluminum "Diamond Knurl" pc case feet which are made in HAAS cnc lathe.

The base diameter is 1- 3/4" with height of 1" to elevate the case for improved airflow beneath it.

For internal lighting, I've chosen installed Orange signal lights.

I added one of the factory cable grommet to the top, for all of the wires from Toggle Switch and CPU Load Tachometer. You can swivel and aim these Signal lights in whatever direction you like...

The signals I found are universal fit for Honda, Yamaha, Suzuki, Kawasaki, or Quad ATV. Here is the Reseller link on Ebay

Enjoi · 8th June 2012, 9:12 AM

so awesome dude, cant wait for more!

mnpctech · 8th June 2012, 9:38 AM

Thank you for tuning in and commenting!

Velocity style cooling fans installed.

Signal lights aimed on the cooling fans.

The Tachometer shell is ready for circuit board...

WishBone17 · 8th June 2012, 12:32 PM

love the signal turn lights, thats awesome idea!
Those Velocity style cooling fans, they do look fantastic, but i'm guessing its rendered useless with all that stuff blocking its intended purpose to blow air?

mnpctech · 9th June 2012, 12:21 AM

Thank you! The velocity fans have large perforated holes that provide ample airflow

Top carry handle fabricated & welded from 3/4" steel tubing

I've added aluminum Diamond plate for base of the CPU Load Tachometer.

2x 140mm black anodized fan / radiator grill with 15mm spacing, the inserts can be manually rotated.

5th June 2012, 8:40 AM	#16
Spyfox Member Join Date: Nov 2010 Location: SWSydney 2173 Posts: 1,265	subbed love your work. big fan __________________ WWW.JDMWHEELS.COM.AU WWW.DUSTYCARTRIDGE.COM

6th June 2012, 12:57 AM	#20
mnpctech Member Join Date: Mar 2003 Location: Minnesota Posts: 612	@Nomad, good to hear from you as well! Thank you @Dave, spoke with him week ago, in middle of remodeling his kitchen... Do you want his email? He would love hearing from you... I couldn't help myself, just file these in folder labeled "Doesn't serve purpose, but looks tits" Drawing inspiration from K&N race series street rod manifold pipes... except these will be mounted like bent "stacks" that will peek out from the rear of chassis.. I've modified pipe from bathroom sink trap I found in Plumbing section at Home depot... made manifold mount from Blue transparent acrylic, I was lucky to get handful of these red anodized 6/32 machine screws from Twizted old online store, Dragonmodz.. which is now closed.., but You can get anodized machine screws from Parts-Express, http://www.fastener-express.com/ __________________ More PC Mods Case Mod Blog

6th June 2012, 10:51 AM	#22
Madengineer Member Join Date: May 2011 Location: Lavington NSW 2641 Posts: 5,080	That is just......Incredible! __________________ 'Fakts still exist even if they're ignored.'

6th June 2012, 10:33 PM	#24
mnpctech Member Join Date: Mar 2003 Location: Minnesota Posts: 612	@Kitler, Thank you for the post! @Madengineer, Thank you for tuning in! @Dave, had to send friend request, before I can PM House of Kolor paint under the sunlight.... This is a Shimrin Metajuls Basecoat with Orange tangerine Kandy... __________________ More PC Mods Case Mod Blog

7th June 2012, 11:56 PM	#26
mnpctech Member Join Date: Mar 2003 Location: Minnesota Posts: 612	Correct, Toggle I'm using has LED. I just discovered some parts are on back order, so I'm having to ask for deadline extension and wait on finishing some stages. I installed our polished Machined aluminum "Diamond Knurl" pc case feet which are made in HAAS cnc lathe. The base diameter is 1- 3/4" with height of 1" to elevate the case for improved airflow beneath it. For internal lighting, I've chosen installed Orange signal lights. I added one of the factory cable grommet to the top, for all of the wires from Toggle Switch and CPU Load Tachometer. You can swivel and aim these Signal lights in whatever direction you like... The signals I found are universal fit for Honda, Yamaha, Suzuki, Kawasaki, or Quad ATV. Here is the Reseller link on Ebay __________________ More PC Mods Case Mod Blog Last edited by mnpctech; 8th June 2012 at 12:32 AM.

5th June 2012, 9:47 AM	#18
Nomad360 New Member Join Date: Jun 2012 Posts: 9	Sweet rig mate! Can't wait to see the final result! Should do any keen Dirt fan well! :P

6th June 2012, 10:36 AM	#21
Kitler Member Join Date: Dec 2006 Location: Geelong Posts: 2,487	Insane stuff. Love it!

7th June 2012, 12:40 AM	#25
Mickatroid Member Join Date: Jun 2002 Location: Canberra Posts: 905	For what it's worth the switch circuit made me panic for a moment because of the way ground is connected but it is for the LED I would guess. For anyone working with a SPDT switch (which also has three connectors) that is not how to wire it

8th June 2012, 9:12 AM	#27
Enjoi Member Join Date: Sep 2010 Location: Melton, VIC Posts: 678	so awesome dude, cant wait for more! __________________ CURRENT WORKLOG GREAT TRADERS: Kurosaki, gokurulz10000, pieceofchance, trippinonprozac, sizza, crocodaVe Proud supporter of THEKOOLROOM - Proud supporter of GAM Mods ---- BF3 Profile: Enjoi_AU

8th June 2012, 9:38 AM	#28
mnpctech Member Join Date: Mar 2003 Location: Minnesota Posts: 612	Thank you for tuning in and commenting! Velocity style cooling fans installed. Signal lights aimed on the cooling fans. The Tachometer shell is ready for circuit board... __________________ More PC Mods Case Mod Blog

9th June 2012, 12:21 AM	#30
mnpctech Member Join Date: Mar 2003 Location: Minnesota Posts: 612	Thank you! The velocity fans have large perforated holes that provide ample airflow Top carry handle fabricated & welded from 3/4" steel tubing I've added aluminum Diamond plate for base of the CPU Load Tachometer. 2x 140mm black anodized fan / radiator grill with 15mm spacing, the inserts can be manually rotated. __________________ More PC Mods Case Mod Blog