Monolith, TX10-V, 3960X, GPU'S are IN!!!!

Sahand · 25th July 2012, 8:15 PM

Click to view full size!
---------------------------------------------------------->

Hey guys. Just posting pics of my new build. Not really a log or anything, just want to share some stuff. Enjoy.

Just got the last few parts for my build today. Tomorrow i will be tearing down my old build and putting it in the TX10-V.

Most people know me from my desk build, that still being done, however its being put on hold.

----------------------------------------------------------->

Build current status:

Click to view full size!

Click to view full size!

----------------------------------------------------------->

Thread Starts Here:

Click to view full size!

Click to view full size!
[Had to order some 5mm M4 screws, as the other ones where to long, i was to fearful of damaging the fins, so screw size was very important to me.]

Click to view full size!
[Last time i tore my build down, i ran out of thermal past so i had to leave the old tim on the blocks, i wasn't to happy about that, so i did a 1 time order for all the thermal pads, paste and cleaning material i will need, ever]

Click to view full size!
[These are all my current fittings, not including the ones in my current system.]

Click to view full size!
[Nice big dye order, i tried out 2 drops UV green in allot of red dye, and it turned out as red, but under UV light green. i might order some UV blue clear dye and do the same thing.]

Click to view full size!
[Wasnt to sure about the new design, i was one of the people that hated it at the start]

Click to view full size!
[cpu block looks very nice.]

Click to view full size!
[so does the ram]

Click to view full size!
[Nice.]

However i don't like the GPU block designs, the circle square design works for the CPU and ram blocks because they are small, but on a larger surface like the GPU blocks, they get overwhelming.

Dr Evil · 25th July 2012, 9:04 PM

soo much compound, your set for a few builds

Moptimus · 25th July 2012, 9:08 PM

If that is the ice dragon style coolant, be warned it removed the nickel from Huggy's CPU block.

Looking forward to seeing this all come together.

Sahand · 25th July 2012, 9:21 PM

I havnt had any experience with ice dragon coolant, but its pastel white, so it looks like milk :3. i just bought if in-case i want to use it in the future.

Yea that's the plan, never want for thermal paste again. no more MSY runs for just thermal paste.

Huggy_Bear64 · 25th July 2012, 10:15 PM

Quote:

Originally Posted by Moptimus

If that is the ice dragon style coolant, be warned it removed the nickel from Huggy's CPU block.

and fun times were had by all...

Quote:

Originally Posted by Sahand

I haven't had any experience with ice dragon coolant, but it's pastel white, so it looks like milk :3.

I thought it was pretty too, until this happened...

Click to view full size!

Benjago · 25th July 2012, 10:16 PM

Quote:

Originally Posted by Huggy_Bear64

and fun times were had by all...

I thought it was pretty too, until this happened...

pix

pix

pix

Thats because you had Micks buck tooth juice mixed into it.

Superchargedftw · 26th July 2012, 6:58 AM

Quote:

Originally Posted by Moptimus

If that is the ice dragon style coolant, be warned it removed the nickel from Huggy's CPU block.

Looking forward to seeing this all come together.

That's because huggy was using shithouse koolance where the OP is using quality EK gear.

Dr Evil · 26th July 2012, 7:07 AM

Quote:

Originally Posted by Superchargedftw

That's because huggy was using shithouse koolance where the OP is using quality EK gear.

Opposite day?

Sahand · 26th July 2012, 7:11 AM

Quote:

Originally Posted by Superchargedftw

That's because huggy was using shithouse koolance where the OP is using quality EK gear.

i admit i loled.

aeon. · 26th July 2012, 8:27 AM

give me some of the money you shit out please

looking forward to seeing this come together...

ur fittings probably cost more than my entire build

Sahand · 26th July 2012, 1:03 PM

i'll lend you my goose that lays golden eggs if you wish.

Iv stayed up all night playing dayz, i cant even look straight and im desperate for sleep, i think now is a good time to tear down my build, don't you?

kazen · 26th July 2012, 1:57 PM

Quote:

Originally Posted by Benjago

Thats because you had Micks buck tooth juice mixed into it.

exactly.

i still cant believe people buy his snakewater block clogger.

Huggy_Bear64 · 26th July 2012, 2:06 PM

Quote:

Originally Posted by kazen

exactly.

i still cant believe people buy his snakewater block clogger.

My blocks weren't clogged at all.
They just didn't have much nickel left...

Sahand · 29th July 2012, 12:49 AM

3X480 rads.

Click to view full size!

Click to view full size!

I really do like the look of the blocks. Frosted plexi is not to bad.

Click to view full size!

Click to view full size!

Made a nifty fill port.

Click to view full size!

Click to view full size!

Final

Click to view full size!

Still need to order fan controler + Lights, and the sleeving needs to be done soon.

And a picture of myself.

Click to view full size!

Also need a better camera

.

Current temps on stock. Il do some Overclocking tomorrow. i will bench it at 5ghz, then run it 24/7 at 4.5Ghz. Then after that all i need is some GPU's power. I don't want to get the 680's, in my opinion nvidia has way more to give and i wont be buying new cards till the next flagship. rumors are new cards sept/oct, keyword rumors.

Click to view full size!

aeon. · 29th July 2012, 10:17 AM

no waterblocked gpu? im disappointed.

25th July 2012, 8:15 PM	#1
Sahand Member Join Date: Jul 2011 Location: Sydney 2763 Posts: 241	Monolith, TX10-V, 3960X, GPU'S are IN!!!! Click to view full size! Click to view full size! Click to view full size! ----------------------------------------------------------> Hey guys. Just posting pics of my new build. Not really a log or anything, just want to share some stuff. Enjoy. Just got the last few parts for my build today. Tomorrow i will be tearing down my old build and putting it in the TX10-V. Most people know me from my desk build, that still being done, however its being put on hold. -----------------------------------------------------------> Build current status: Click to view full size! Click to view full size! -----------------------------------------------------------> Thread Starts Here: Click to view full size! Click to view full size! Click to view full size! Click to view full size! Click to view full size! [Had to order some 5mm M4 screws, as the other ones where to long, i was to fearful of damaging the fins, so screw size was very important to me.] Click to view full size! [Last time i tore my build down, i ran out of thermal past so i had to leave the old tim on the blocks, i wasn't to happy about that, so i did a 1 time order for all the thermal pads, paste and cleaning material i will need, ever] Click to view full size! [These are all my current fittings, not including the ones in my current system.] Click to view full size! [Nice big dye order, i tried out 2 drops UV green in allot of red dye, and it turned out as red, but under UV light green. i might order some UV blue clear dye and do the same thing.] Click to view full size! [Wasnt to sure about the new design, i was one of the people that hated it at the start] Click to view full size! [cpu block looks very nice.] Click to view full size! [so does the ram] Click to view full size! [Nice.] However i don't like the GPU block designs, the circle square design works for the CPU and ram blocks because they are small, but on a larger surface like the GPU blocks, they get overwhelming. Last edited by Sahand; 30th September 2012 at 11:12 AM.

25th July 2012, 9:08 PM	#3
Moptimus Member Join Date: Aug 2011 Location: Nambour-by-the-Sea Posts: 827	If that is the ice dragon style coolant, be warned it removed the nickel from Huggy's CPU block. Looking forward to seeing this all come together. __________________ Trades: koitech; bricktop; Mr DOHC; Bertross; Nerdbox87; Vantec; Rory K; i0Nic, Creepin, trash, Unr3strictable, EpicPCcases, omaraa, madaimer, pakka, mkusanagi, mrflay, illuminati, OnGsTa, doodz, interlopr.

25th July 2012, 9:21 PM	#4
Sahand Member Join Date: Jul 2011 Location: Sydney 2763 Posts: 241	I havnt had any experience with ice dragon coolant, but its pastel white, so it looks like milk :3. i just bought if in-case i want to use it in the future. Yea that's the plan, never want for thermal paste again. no more MSY runs for just thermal paste. __________________ Desk build:http://forums.overclockers.com.au/sh....php?t=1026109 /\ TX10-V Build Gallary:http://forums.overclockers.com.au/sh....php?t=1042932 System: I7 3960X / Asus Rampage 4 Extreme / 32GB Corsair Dominator / 2x 680 DCUII TOP's / Cooling: Cpu: EK Supremacy Nickle Plexi / Ram 2x EK Dominator CSQ Nickle Plexi / MB: EK-FB KIT RE4 / Pumps: 2xD5 / 3X480 BlackIce GTX /

26th July 2012, 1:03 PM	#11
Sahand Member Join Date: Jul 2011 Location: Sydney 2763 Posts: 241	i'll lend you my goose that lays golden eggs if you wish. Iv stayed up all night playing dayz, i cant even look straight and im desperate for sleep, i think now is a good time to tear down my build, don't you? __________________ Desk build:http://forums.overclockers.com.au/sh....php?t=1026109 /\ TX10-V Build Gallary:http://forums.overclockers.com.au/sh....php?t=1042932 System: I7 3960X / Asus Rampage 4 Extreme / 32GB Corsair Dominator / 2x 680 DCUII TOP's / Cooling: Cpu: EK Supremacy Nickle Plexi / Ram 2x EK Dominator CSQ Nickle Plexi / MB: EK-FB KIT RE4 / Pumps: 2xD5 / 3X480 BlackIce GTX /

29th July 2012, 12:49 AM	#14
Sahand Member Join Date: Jul 2011 Location: Sydney 2763 Posts: 241	3X480 rads. Click to view full size! Click to view full size! Click to view full size! I really do like the look of the blocks. Frosted plexi is not to bad. Click to view full size! Click to view full size! Click to view full size! Click to view full size! Made a nifty fill port. Click to view full size! Click to view full size! Final Click to view full size! Still need to order fan controler + Lights, and the sleeving needs to be done soon. And a picture of myself. Click to view full size! Also need a better camera . Current temps on stock. Il do some Overclocking tomorrow. i will bench it at 5ghz, then run it 24/7 at 4.5Ghz. Then after that all i need is some GPU's power. I don't want to get the 680's, in my opinion nvidia has way more to give and i wont be buying new cards till the next flagship. rumors are new cards sept/oct, keyword rumors. Click to view full size! Click to view full size! __________________ Desk build:http://forums.overclockers.com.au/sh....php?t=1026109 /\ TX10-V Build Gallary:http://forums.overclockers.com.au/sh....php?t=1042932 System: I7 3960X / Asus Rampage 4 Extreme / 32GB Corsair Dominator / 2x 680 DCUII TOP's / Cooling: Cpu: EK Supremacy Nickle Plexi / Ram 2x EK Dominator CSQ Nickle Plexi / MB: EK-FB KIT RE4 / Pumps: 2xD5 / 3X480 BlackIce GTX /

26th July 2012, 8:27 AM	#10
aeon. Member Join Date: Apr 2012 Posts: 455	give me some of the money you shit out please looking forward to seeing this come together... ur fittings probably cost more than my entire build

29th July 2012, 10:17 AM	#15
aeon. Member Join Date: Apr 2012 Posts: 455	no waterblocked gpu? im disappointed.