Tbred B Steppings - Post Your Overclocks (Stable) - Page 22

B£å¢kÐðg · 8th May 2003, 11:43 AM

This is a start, I thought this was pretty good for only a slight increase in voltage, will go for more later

Motherboard: Soltek FRN2-RL
Cooling: SLK-800
Default Speed: XP2100+
Default Voltage: 1.6
Overclocked Speed: 2172mhz
Overclocked Voltage: 1.625
Stepping Information: AIUHB 0302
Stability: 3dmark and sisoft sandra looping for hours plus prime95 torture test

AuroythmiX** · 15th May 2003, 8:57 PM

Motherboard: 8K3A+
Cooling: Stock AMD HSF
Default Speed: XP2100 (1733)
Default Voltage: 1.60
Overclocked Speed: 13x166 @ 1.60V (2158) and 13x180 @ 1.75V (2340)
Overclocked Voltage: as above
Stepping Information: 0307
Stability: Prime95 for 2 hours each. Also ran 3Dmark twice each and lots of WC3 hehe.
Temps: At 2340 it is getting VERY hot. Its stock cooler with AS3 atm. Waiting to find a decent HSF on the forums as I just sold my MCX462A and MCXC370.

Greystorm · 15th May 2003, 9:25 PM

Motherboard: Soltek 75FRN2-L (Bios 1.1L)
Cooling: Spire Falcon Rock II
Default Speed: XP2100+ (1733)
Default Voltage: 1.60
Overclocked Speed: 2174 (13x166.6`)
Overclocked Voltage: 1.75 (Wasn't prime stable at 1.7, wouldn't boot at 1.6)
Stepping: AIUHB 0306
Stability: 14 hours of Prime95. 3D Mark a few times and 20 Sandra burn ins.
Temps: 52c load. 42c idle (on die readings)

Vlat · 16th May 2003, 11:39 AM

Motherboard: 8RDA+
Cooling: Watercooling (see sig. for more details)
Default Speed: 2400+ 2.0gHz
Default Voltage: 1.6v
Overclocked Speed: 2.29gHz (12 x 190mHz)
Overclocked Voltage: 1.85v
Stepping Information: AIUHB0306
Stability: Stable in prime for hours, used as daily machine with no problems, 49c load, 43c idle on high fan speed, 51c load, 46c idle in silent mode

lukasz_l · 16th May 2003, 12:49 PM

Motherboard: ABIT NF7 Rev 2
cooling: taisol copper core heatsink
Default Speed: 1733 (2100+)
Default Voltage: 1.6v
Overclocked Speed: 2415 (11.5x210)
Overclocked Voltage: 1.9v (48C LOAD (PRIME95), 30C M/board)
Stepping Information: XP2100 AIUHB0306, i think
Stability: prime 95 overnight

SpeedyDerek · 20th May 2003, 10:27 PM

Motherboard: ABIT NF7 Rev 2
Cooling: Default AMD HSF
Default Speed: 2000 (2400+)
Default Voltage: 1.65v
Overclocked Speed: 2200 (11x200)
Overclocked Voltage: 1.75v
Stepping Information: unsure, i checked but didnt write it down, pretty sure it is an AHIUB
Stability: folding@home 48hrs, 3dmark benchmark, 2 hours solid gameplay on RTCW:ET.

SMOKINPC · 21st May 2003, 7:05 AM

m/b........................ 8RDA+

COOLING................VANTEC AIROFLOW

DEFAULT SPEED.......1733MHZ

DEFAULT VOLTS........1.65V

O/C SPEED................2350MHZ

O/C VOLTS.................1.80V

MULTIPYER .................13.5 X 175MHZ [FSB]

SO FAR NO PROBS AND HAS BEEN RUNNING
UNDER 50CEL UNDER LOAD AND HAVE RUN 3DMARK
AND HOURS OF BF 1942.......

Mawler · 21st May 2003, 10:15 AM

Motherboard: ABIT NF7 Rev 1.2
Cooling: SLK800 w/Sunon 50cfm Fan Running on PSU's Fan Header (Quiet)
Default Speed: 1733 (2100+)
Default Voltage: 1.60v
Overclocked Speed: 2400 (12x200)
Overclocked Voltage: 1.85v
Stepping Information: AHIUB 0305
Stability: Prime, 3DMark2001se, Memtest.

This is where it is strange.
I first got the CPU and it required 1.9v to make 2400mhz.
Then it became unstable a week or so down the track and required 1.95v for 2400mhz.
Now I recently flashed to a BETA 1.9 bios and decided to give it another shot.
It only needed 1.85v for 2400mhz.

Prime95 overnight several hours of 3DMark2001se and Memtest.

Possibly burnt in now?!?

Tenoq · 22nd May 2003, 4:14 PM

Motherboard: Abit NF7-2 Rev 2
Cooling: X-Dream
Default Speed: 2000 (2400+)
Default Voltage: 1.65v
Overclocked Speed: 2300 (11.5x200)
Overclocked Voltage: 1.95v
Stepping Information: AIUHB 0302
Stability: Prime Torture for an hour.

Was kinda hoping to get a little more out of this chip, given others' sucess with the 0302s. I can bench at around 2363, but it won't prime, with same 1.95v. Given I'm on air, don't really want to go any higher... that said, current temps while priming are Ambient 14, Case 25 and CPU 45 at 1.95v. This is with the latest bios - seems pretty good for air... a little too good, mayb?

Mayb CPU just needs a burn-in... 2.4Ghz stable would be nice - any suggestions? :P

cino · 22nd May 2003, 5:30 PM

Motherboard: Abit NF7 V2.0
Cooling: SLK 900 + 92mm Enermax (low speed)
Default Speed: 1733 (2100+)
Default Voltage: 1.60V
Overclocked Speed: 2405Mhz - 12x200
Overclocked Voltage: 1.8V
Stepping Information: AIUHB 0306MPMW

Bravo · 22nd May 2003, 5:36 PM

Motherboard: Abit NF7 V1.2
Cooling: White Water/Ehiem 1048/Little Arse Rad with 108cfm Panaflow
Default Speed: 1733 (2100+)
Default Voltage: 1.65V
Overclocked Speed: 2505Mhz - 12.5x200
Overclocked Voltage: 1.96V (2.0v selected)
Stepping Information: AIUHB 0307MPMW

Stablity: 2 hours of Prime95:

Does 2.6gig, but its not reliable

Bravo · 25th May 2003, 6:03 PM

Still ramping, going to try using 2.15v to get 2.6gig.

Vow · 25th May 2003, 7:41 PM

Quote:

Originally posted by Bravo
Still ramping, going to try using 2.15v to get 2.6gig.

Don't kill it Bravo ffs!

Sephir0th · 25th May 2003, 9:22 PM

Quote:

Originally posted by Vow
Don't kill it Bravo ffs!

haha typical bravo....

just got me NF7-S 2.0 yesterday, still playin around to find the max of this kingston CL2.5 value ram..at 180fsb 2-2-2-6 at 2.8v atm...primed ok so might try a bit higher...then il try cranking the vcore n stuff

froggi · 25th May 2003, 9:24 PM

just got an xp2100+ today, right before the price cut of the amd cpu >_<
what do u guys think of the oc potential of this chip?

axda21000dut3c 9762107240244
aiuhb0302mpmw

i haven't got a mb to try it out yet

8th May 2003, 11:43 AM	#316
B£å¢kÐðg Member Join Date: Nov 2002 Location: Brisbane (Australia) Posts: 99	This is a start, I thought this was pretty good for only a slight increase in voltage, will go for more later Motherboard: Soltek FRN2-RL Cooling: SLK-800 Default Speed: XP2100+ Default Voltage: 1.6 Overclocked Speed: 2172mhz Overclocked Voltage: 1.625 Stepping Information: AIUHB 0302 Stability: 3dmark and sisoft sandra looping for hours plus prime95 torture test __________________ "If I were human, I believe the correct response would be 'Go to Hell'

15th May 2003, 8:57 PM	#317
AuroythmiX** Member Join Date: Dec 2001 Posts: 3,503	Motherboard: 8K3A+ Cooling: Stock AMD HSF Default Speed: XP2100 (1733) Default Voltage: 1.60 Overclocked Speed: 13x166 @ 1.60V (2158) and 13x180 @ 1.75V (2340) Overclocked Voltage: as above Stepping Information: 0307 Stability: Prime95 for 2 hours each. Also ran 3Dmark twice each and lots of WC3 hehe. Temps: At 2340 it is getting VERY hot. Its stock cooler with AS3 atm. Waiting to find a decent HSF on the forums as I just sold my MCX462A and MCXC370. Last edited by AuroythmiX; 15th May 2003 at 9:12 PM.

15th May 2003, 9:25 PM	#318
Greystorm Member Join Date: Jun 2001 Location: Brisbane Posts: 1,117	Motherboard: Soltek 75FRN2-L (Bios 1.1L) Cooling: Spire Falcon Rock II Default Speed: XP2100+ (1733) Default Voltage: 1.60 Overclocked Speed: 2174 (13x166.6`) Overclocked Voltage: 1.75 (Wasn't prime stable at 1.7, wouldn't boot at 1.6) Stepping: AIUHB 0306 Stability: 14 hours of Prime95. 3D Mark a few times and 20 Sandra burn ins. Temps: 52c load. 42c idle (on die readings) __________________ OCAU Trusted Traders \| My Vendor Verdict (or was) \| ConsoleRadar - Console Discussion \| What is MIA? Man, every link in my signature is dead. I should update it... Last edited by Greystorm; 18th May 2003 at 9:59 AM.

21st May 2003, 7:05 AM	#322
SMOKINPC Member Join Date: Apr 2003 Posts: 9	still getting a bit more speed m/b........................ 8RDA+ COOLING................VANTEC AIROFLOW DEFAULT SPEED.......1733MHZ DEFAULT VOLTS........1.65V O/C SPEED................2350MHZ O/C VOLTS.................1.80V MULTIPYER .................13.5 X 175MHZ [FSB] SO FAR NO PROBS AND HAS BEEN RUNNING UNDER 50CEL UNDER LOAD AND HAVE RUN 3DMARK AND HOURS OF BF 1942....... __________________ =To Live Is To Make A Difference=

21st May 2003, 10:15 AM	#323
Mawler Member Join Date: Aug 2002 Location: Adelaide Posts: 232	Motherboard: ABIT NF7 Rev 1.2 Cooling: SLK800 w/Sunon 50cfm Fan Running on PSU's Fan Header (Quiet) Default Speed: 1733 (2100+) Default Voltage: 1.60v Overclocked Speed: 2400 (12x200) Overclocked Voltage: 1.85v Stepping Information: AHIUB 0305 Stability: Prime, 3DMark2001se, Memtest. This is where it is strange. I first got the CPU and it required 1.9v to make 2400mhz. Then it became unstable a week or so down the track and required 1.95v for 2400mhz. Now I recently flashed to a BETA 1.9 bios and decided to give it another shot. It only needed 1.85v for 2400mhz. Prime95 overnight several hours of 3DMark2001se and Memtest. Possibly burnt in now?!? __________________ ABIT NF7-S Rev 1.2 (Bios 21) XP 2100+ AIUHB 0305 @ 200x11.5 - 2300mhz 512mb OCZ EL Dual Channel PC3500 HIS Excailbur 9700 Pro (325core/310mem)

16th May 2003, 11:39 AM	#319
Vlat Member Join Date: Jan 2002 Location: Melbourne Posts: 99	Motherboard: 8RDA+ Cooling: Watercooling (see sig. for more details) Default Speed: 2400+ 2.0gHz Default Voltage: 1.6v Overclocked Speed: 2.29gHz (12 x 190mHz) Overclocked Voltage: 1.85v Stepping Information: AIUHB0306 Stability: Stable in prime for hours, used as daily machine with no problems, 49c load, 43c idle on high fan speed, 51c load, 46c idle in silent mode

16th May 2003, 12:49 PM	#320
lukasz_l Member Join Date: Jul 2001 Location: Sydney Posts: 25	Motherboard: ABIT NF7 Rev 2 cooling: taisol copper core heatsink Default Speed: 1733 (2100+) Default Voltage: 1.6v Overclocked Speed: 2415 (11.5x210) Overclocked Voltage: 1.9v (48C LOAD (PRIME95), 30C M/board) Stepping Information: XP2100 AIUHB0306, i think Stability: prime 95 overnight

20th May 2003, 10:27 PM	#321
SpeedyDerek Member Join Date: Mar 2002 Location: Melbourne (South East) Posts: 197	Motherboard: ABIT NF7 Rev 2 Cooling: Default AMD HSF Default Speed: 2000 (2400+) Default Voltage: 1.65v Overclocked Speed: 2200 (11x200) Overclocked Voltage: 1.75v Stepping Information: unsure, i checked but didnt write it down, pretty sure it is an AHIUB Stability: folding@home 48hrs, 3dmark benchmark, 2 hours solid gameplay on RTCW:ET.

22nd May 2003, 4:14 PM	#324
Tenoq Member Join Date: Mar 2003 Location: Melbourne Posts: 3,672	Motherboard: Abit NF7-2 Rev 2 Cooling: X-Dream Default Speed: 2000 (2400+) Default Voltage: 1.65v Overclocked Speed: 2300 (11.5x200) Overclocked Voltage: 1.95v Stepping Information: AIUHB 0302 Stability: Prime Torture for an hour. Was kinda hoping to get a little more out of this chip, given others' sucess with the 0302s. I can bench at around 2363, but it won't prime, with same 1.95v. Given I'm on air, don't really want to go any higher... that said, current temps while priming are Ambient 14, Case 25 and CPU 45 at 1.95v. This is with the latest bios - seems pretty good for air... a little too good, mayb? Mayb CPU just needs a burn-in... 2.4Ghz stable would be nice - any suggestions? :P

22nd May 2003, 5:30 PM	#325
cino Member Join Date: Jul 2001 Location: Melbourne Posts: 97	Motherboard: Abit NF7 V2.0 Cooling: SLK 900 + 92mm Enermax (low speed) Default Speed: 1733 (2100+) Default Voltage: 1.60V Overclocked Speed: 2405Mhz - 12x200 Overclocked Voltage: 1.8V Stepping Information: AIUHB 0306MPMW __________________ there is no place like 127.0.0.1 €înø

22nd May 2003, 5:36 PM	#326
Bravo Member Join Date: Jun 2001 Location: Brisbane, Australia Posts: 10,051	Motherboard: Abit NF7 V1.2 Cooling: White Water/Ehiem 1048/Little Arse Rad with 108cfm Panaflow Default Speed: 1733 (2100+) Default Voltage: 1.65V Overclocked Speed: 2505Mhz - 12.5x200 Overclocked Voltage: 1.96V (2.0v selected) Stepping Information: AIUHB 0307MPMW Stablity: 2 hours of Prime95: Does 2.6gig, but its not reliable Last edited by Bravo; 22nd May 2003 at 5:38 PM.

25th May 2003, 6:03 PM	#327
Bravo Member Join Date: Jun 2001 Location: Brisbane, Australia Posts: 10,051	Still ramping, going to try using 2.15v to get 2.6gig.

25th May 2003, 9:24 PM	#330
froggi Member Join Date: Jan 2002 Location: Melbourne Posts: 432	just got an xp2100+ today, right before the price cut of the amd cpu >_< what do u guys think of the oc potential of this chip? axda21000dut3c 9762107240244 aiuhb0302mpmw i haven't got a mb to try it out yet Last edited by froggi; 25th May 2003 at 11:27 PM.