Pentium D 3.2 EE@4.4

chainbolt · 18th May 2005, 9:26 AM

Overclocking results with

840EE (3.2 Ghz)
Voltage 1.45 volt (CPU-Z screenshot is of course wrong)
P5WD2
DDR2 4200 3-3-3
aircooled (not Intel stock)

The system is of course not stable at 4.16.

nVIDIAxp · 18th May 2005, 9:28 AM

chainy
could you run 2 superpi at once to see the power of dualcore?

Danthemanz · 18th May 2005, 9:34 AM

Holy crap that would be one hot CPU....
I take it the voltage listed is wrong?

annandin · 18th May 2005, 9:48 AM

Do you have a highest stable overclock yet?

chainbolt · 18th May 2005, 12:09 PM

Quote:

Originally Posted by Danthemanz

Holy crap that would be one hot CPU....
I take it the voltage listed is wrong?

(as I mentioned).

Vcore is 1.45

chainbolt · 18th May 2005, 12:20 PM

Quote:

Originally Posted by annandin

Do you have a highest stable overclock yet?

yes, a shown 4.16 GHz. I tried with my entry level water cooling kit: no difference. Maybe I could squeeze out 50 MHz more, but that would probably "corrupt" XP.

Almost 1 GHz on top is anway far better than what I expected from such a already "high" clocked dual core processor. I thought I would end up with 600 MHz.

Pbx_Jnr · 18th May 2005, 12:27 PM

Hey Dr Chainy

Is this just a test chip that you got or do you actually own this little beauty?? And secondly, ARE YOU FOLDING WITH IT?!?! lol When do you reckon these chips will be available here?

Cheers,

Pbx_Jnr

bphelan · 18th May 2005, 12:37 PM

It is an Engineering Sample according to another Thread

chainbolt · 18th May 2005, 12:42 PM

Quote:

Originally Posted by Pbx_Jnr

Hey Dr Chainy

Is this just a test chip that you got or do you actually own this little beauty?? And secondly, ARE YOU FOLDING WITH IT?!?! lol When do you reckon these chips will be available here?

Cheers,

Pbx_Jnr

sure, I am folding, the first screen shot is taken with 2 instances running. In that case the processor is only 50%. If you have 4 instances running it's 100%.

Intel dual core processors will be available in AUS within May, probably next week.

Danthemanz · 18th May 2005, 12:48 PM

Quote:

Originally Posted by chainbolt

(as I mentioned).

Vcore is 1.45

lol, sorry..
So what temps are you getting?

dinos22 · 18th May 2005, 12:57 PM

i was convinced chainbolt is going AMD dual core.....

i guess not...nice OC...what's it stable at....i wish AMD do something on the prices otherwise my next PC will be Intel....hell that's why we started buying the bastards.....Synnex is listing Dual Core Intel CPUs already but not stocked......so shouldn't be too much longer there......I hate OCAU....you've infected me with a permanent "upgrade bug"....now i want to go get the damn thing cause who knows how long AMD DC will take to trickle in Australia and at what price

SaMbO · 18th May 2005, 1:00 PM

you're welcome

must have bestest "x"

SaMbO
/happy to call OCAU home!

chainbolt · 18th May 2005, 1:02 PM

Quote:

Originally Posted by Danthemanz

lol, sorry..
So what temps are you getting?

To avoid any misunderstanding I posted a pic of the set-up, as you can see the board is not installed in a case, and I have aircon running because it's summer here and getting hot. My temps are therefore not representative for "common" usage.

The system is idling at around 40C. Keep in mind that the 8xx series has the full array of temp reducing stuff implemented, TT2, EIST and C1. In idle or low load the 8xx series dual core procs run actually cooler than a first generation Prescott. The problem is full load. In that case EIST (speed step) does not work anymore. If I "fold" with 4 instances, that brings the processor to constant 100% load (means worst case scenario), I'm at 71C with aircooling. It would be probably 75C when the board is installed in case.

chainbolt · 18th May 2005, 1:04 PM

Quote:

Originally Posted by dinos22

i was convinced chainbolt is going AMD dual core.....

can't do that as the administrator of the Intel forum

Pbx_Jnr · 18th May 2005, 1:08 PM

Quote:

Originally Posted by chainbolt

can't do that as the administrator of the Intel forum

You've never had the temptation???

Come on..... come to the darkside.....

18th May 2005, 9:26 AM	#1
chainbolt The Deputy of Love ® Join Date: Jun 2001 Location: Tokyo Posts: 56,038	Pentium D 3.2 EE@4.4 Overclocking results with 840EE (3.2 Ghz) Voltage 1.45 volt (CPU-Z screenshot is of course wrong) P5WD2 DDR2 4200 3-3-3 aircooled (not Intel stock) The system is of course not stable at 4.16. Last edited by chainbolt; 18th May 2005 at 12:19 PM.

18th May 2005, 9:28 AM	#2
nVIDIAxp Member Join Date: Jun 2003 Location: North Shore, Sydney Posts: 1,157	chainy could you run 2 superpi at once to see the power of dualcore? __________________ Intel Core 2 Extreme QX9650 @ 4G\|ASUS Rampage Formula\|Team Xtreem 6400 4GB D9GMH @ 1000 4-4-4-10\|MSI 285GTX\|WD Velociraptor BLFS 300G4 Raid 0\|Pioneer DVR A09XL\|Creative X-Fi Elite Pro\|Logitech Z-5450\|PC Power & Cooling 1KW\|Dell 3007WFP-HC\|CM Stacker 830 Evo nVIDIA Edition*

18th May 2005, 9:48 AM	#4
annandin Member Join Date: Jul 2004 Location: Hobart Posts: 881	Do you have a highest stable overclock yet? __________________ .:PCDB \| My Photography \| My Folding Stats:.

18th May 2005, 12:27 PM	#7
Pbx_Jnr Member Join Date: Jun 2003 Location: Brisbane, QLD Posts: 693	Hey Dr Chainy Is this just a test chip that you got or do you actually own this little beauty?? And secondly, ARE YOU FOLDING WITH IT?!?! lol When do you reckon these chips will be available here? Cheers, Pbx_Jnr __________________ q6600@3.06ghz \| GB EP45-DS3L \| 4GB Transcend \| Palit 4870 \| Samsung 750GB \| Enermax 535W \| CMV 221D Other PCs - Opteron 148@3.02ghz // C2D e4500@3.02ghz // C2D e2200@3ghz // Asus A8S Laptop Brotherhood Against PM Bidders - Member #7 OCAU MetaL Club Member #777 QLD CS:S LAN!

18th May 2005, 12:37 PM	#8
bphelan Member Join Date: Oct 2002 Location: Brisbane River Bank Posts: 1,443	It is an Engineering Sample according to another Thread __________________ I use computers, I am Senile and I Vote..Be very afraid !

18th May 2005, 9:34 AM	#3
Danthemanz Old School Admin Join Date: Jun 2001 Location: Sydney Posts: 1,513	Holy crap that would be one hot CPU.... I take it the voltage listed is wrong?

18th May 2005, 12:57 PM	#11
dinos22 Member Join Date: May 2004 Posts: 9,794	i was convinced chainbolt is going AMD dual core..... i guess not...nice OC...what's it stable at....i wish AMD do something on the prices otherwise my next PC will be Intel....hell that's why we started buying the bastards.....Synnex is listing Dual Core Intel CPUs already but not stocked......so shouldn't be too much longer there......I hate OCAU....you've infected me with a permanent "upgrade bug"....now i want to go get the damn thing cause who knows how long AMD DC will take to trickle in Australia and at what price __________________ dinos22 - Team.AU OCAU Fishing Club Member

18th May 2005, 1:00 PM	#12
SaMbO Member Join Date: Dec 2002 Location: Mid North Coast Posts: 2,251	you're welcome must have bestest "x" SaMbO /happy to call OCAU home! __________________ Currently Playing: Demon's Souls, Infamous I know my stats bore you... but here they are anyway: My PS3 TrophyCard