Athlon XP 1700 Operating Temperature

tobinmundy · 19th March 2002, 12:06 PM

Can any one offer suggestions on what I should expect as the normal operating temperature for an Athlon XP 1700 (not overclocked).

Thanks

Bravo · 19th March 2002, 12:12 PM

30 - 50C is an acceptable range, the cooler the better. It depends on what sort of heatsink you are going to use

AERO · 19th March 2002, 12:42 PM

i had my xp1600+ not overclocked and it was runnn 33 degrees under full oad, then i overlcocked it to almost xp2000+ mhz and its runnin 36 degrees using a vulcano 7 which cost me like $45 from www.pcca.com.au

i think thats the site. but yer w00t from a computerilliterate person 8)

DiVi8 · 19th March 2002, 12:54 PM

My XP1700 is running 42 degrees idle and 50 degrees under full load. Ambient temp is ~28 degrees and MB temp 32 degrees Running with shitty Vulcano 7 ATM.

However it is oc. It's @ 1666 with 1.825V. So more heat is produce.

DiVi8

Roman · 19th March 2002, 2:33 PM

My Athlon normally runs at 50 - no wander XP keeps freezing hard on me

Draffa · 19th March 2002, 6:46 PM

My 1600+ with a GlobalWin WBK68 hs and GlobalWin fan (unknown tpe, 7200rpm) runns at 39 degrees while folding. (at least, that's what MBM 4 said, now that i've upgraded to MBM 5.17, it reckons it's running @ 127 degrees

)

SWEDKG · 19th March 2002, 8:34 PM

Mine is running at 43-45°C (20-22°C ambient) full load with a 5.5k fan @ 7v on a ThermoEngine.

Nasher · 19th March 2002, 10:46 PM

Quote:

Originally posted by Roman
My Athlon normally runs at 50 - no wander XP keeps freezing hard on me

My XP1600+ is running at 57°c right now under full load (folding), and I'm yet to have a crash.

iced · 20th March 2002, 12:29 AM

geeeeeeeeez... 36 deg c from 1600+ to 2000+
i dont think so man
...... i look at my system...........there no way........i own a volcano 6cu+ as well as thermoengine turbo editon w/ ystech 7000rpm
on tmep comes up very similar on a asus a7a266-e and msi k7t turbo R

and the msi has a temp probe that actaully touches the core...those flexy ones.....

AERO esp..... from 1600+ and 2k+
i my be wrong..... but spome sensors are terribly in acurate...... using a 15$ and 55$ cooler has 3 degrees diff on full load......

tizeyboy · 20th March 2002, 8:17 AM

Quote:

Originally posted by AERO
...then i overlcocked it to almost xp2000+ mhz and its runnin 36 degrees using a vulcano 7

highly unlikely.. xp2000+ have a big heat output... what board are you using?

dOi_belldandy · 20th March 2002, 11:09 AM

I suppose 50 under full load and o/c is about right. Anything more than that and you might be asking for trouble

AERO · 20th March 2002, 12:07 PM

Epox 8kta3l+ thats using bios
and also using speedfan to see the temperature which is 34 today though i have only just turned the thing on, i can send u a screeny of speedfan and the wincpuid of it for you if u dont believe me. note i have the vulcano 7 not the vulcano 6cu+ and using artic silver 2 . oh and not to mention the 120mm enermax fan directly above the hs/fan running full rpm.

jobbers · 20th March 2002, 5:18 PM

The idle temp for the Athlon XP 1700 i have, at default speed, was 39 degrees @26 ambient. Using the old Alpha PAL6045.

I havent unlocked it yet.. I use it day to day at 1650MHz, 150fsb. Right now temp is 56 underload (folding) @ 32 ambient. No probs rock solid.

Oh, side panel is always off

Suntzu · 20th March 2002, 5:30 PM

see spec below

no o/ced with ambient warm at 28c (mobo 30c)
idle:57
Load: 65c

Does not lock up but I have a shitty HSF

I DO NOT BELIEVE THE ASUS REPORTED TEMPS I think they are 10c high than actual based on others comments

when o/c to 1.6 gig it is too hot and crashes.

i am getting a volcano 7 tommorow as mu current hsf is only 8cm 2800rpm.

I do have good thermally controlled case fans but.

Its very quiet too, that is until 32 c when the thermistor kicks in and the case tries to take off when the fans rev up ! Fun but ;-)

cheers

Rogue · 21st March 2002, 1:55 PM

Dual XP1700s - Alpha PAL6035 Heatsinks with YSTech 4500RPM fans.

Ambient : 24deg
Motherboard : 28deg
CPUs : 44deg & 46deg

All temps are full load (SETI).

19th March 2002, 12:06 PM	#1
tobinmundy Member Join Date: Jan 2002 Location: Melbourne Posts: 6	Athlon XP 1700 Operating Temperature Can any one offer suggestions on what I should expect as the normal operating temperature for an Athlon XP 1700 (not overclocked). Thanks

19th March 2002, 12:54 PM	#4
DiVi8 Member Join Date: Jul 2001 Location: Melbourne, SE suburbs Posts: 1,059	My XP1700 is running 42 degrees idle and 50 degrees under full load. Ambient temp is ~28 degrees and MB temp 32 degrees Running with shitty Vulcano 7 ATM. However it is oc. It's @ 1666 with 1.825V. So more heat is produce. DiVi8 __________________ Blah, Blah, Blah. Sig, Sig, Sig.

19th March 2002, 6:46 PM	#6
Draffa Member Join Date: Jun 2001 Location: Sluggy Prime Posts: 7,781	My 1600+ with a GlobalWin WBK68 hs and GlobalWin fan (unknown tpe, 7200rpm) runns at 39 degrees while folding. (at least, that's what MBM 4 said, now that i've upgraded to MBM 5.17, it reckons it's running @ 127 degrees ) __________________ \| This post was brought to you by the Australian DSD, and Americas' NSA. If you think no one's paying any attention to you, we're listening. \| Worship the Comic. \| I aim to misbehave. \| Reduce, Reuse, Repair, Recycle. \| 2010 HoR Candidate for Longman.

19th March 2002, 8:34 PM	#7
SWEDKG Member Join Date: Aug 2001 Location: Land of the banned arcades Posts: 394	Mine is running at 43-45°C (20-22°C ambient) full load with a 5.5k fan @ 7v on a ThermoEngine. __________________ i'm no more than human.. got my ups and downs.. sometimes i'm a god, sometimes i'm an animal...

20th March 2002, 11:09 AM	#11
dOi_belldandy Member Join Date: Mar 2002 Location: Melbourne, Victoria Posts: 569	I suppose 50 under full load and o/c is about right. Anything more than that and you might be asking for trouble __________________ OCAU Animé Club Member #09 Nintendo DS Owners Club #9 Blog on at: part-time paparazzo!

19th March 2002, 12:12 PM	#2
Bravo Member Join Date: Jun 2001 Location: Brisbane, Australia Posts: 10,051	30 - 50C is an acceptable range, the cooler the better. It depends on what sort of heatsink you are going to use

19th March 2002, 12:42 PM	#3
AERO Member Join Date: Aug 2001 Location: lavington 2641 nsw Posts: 2,417	i had my xp1600+ not overclocked and it was runnn 33 degrees under full oad, then i overlcocked it to almost xp2000+ mhz and its runnin 36 degrees using a vulcano 7 which cost me like $45 from www.pcca.com.au i think thats the site. but yer w00t from a computerilliterate person 8)

19th March 2002, 2:33 PM	#5
Roman Member Join Date: Feb 2002 Posts: 4	My Athlon normally runs at 50 - no wander XP keeps freezing hard on me

20th March 2002, 12:29 AM	#9
iced Member Join Date: Jun 2001 Location: Sydney Posts: 347	geeeeeeeeez... 36 deg c from 1600+ to 2000+ i dont think so man ...... i look at my system...........there no way........i own a volcano 6cu+ as well as thermoengine turbo editon w/ ystech 7000rpm on tmep comes up very similar on a asus a7a266-e and msi k7t turbo R and the msi has a temp probe that actaully touches the core...those flexy ones..... AERO esp..... from 1600+ and 2k+ i my be wrong..... but spome sensors are terribly in acurate...... using a 15$ and 55$ cooler has 3 degrees diff on full load......

20th March 2002, 12:07 PM	#12
AERO Member Join Date: Aug 2001 Location: lavington 2641 nsw Posts: 2,417	Epox 8kta3l+ thats using bios and also using speedfan to see the temperature which is 34 today though i have only just turned the thing on, i can send u a screeny of speedfan and the wincpuid of it for you if u dont believe me. note i have the vulcano 7 not the vulcano 6cu+ and using artic silver 2 . oh and not to mention the 120mm enermax fan directly above the hs/fan running full rpm.

20th March 2002, 5:18 PM	#13
jobbers Member Join Date: Jun 2001 Location: QLD Posts: 159	The idle temp for the Athlon XP 1700 i have, at default speed, was 39 degrees @26 ambient. Using the old Alpha PAL6045. I havent unlocked it yet.. I use it day to day at 1650MHz, 150fsb. Right now temp is 56 underload (folding) @ 32 ambient. No probs rock solid. Oh, side panel is always off __________________ suprise!

20th March 2002, 5:30 PM	#14
Suntzu Member Join Date: Jun 2001 Location: Canberra Posts: 1,798	see spec below no o/ced with ambient warm at 28c (mobo 30c) idle:57 Load: 65c Does not lock up but I have a shitty HSF I DO NOT BELIEVE THE ASUS REPORTED TEMPS I think they are 10c high than actual based on others comments when o/c to 1.6 gig it is too hot and crashes. i am getting a volcano 7 tommorow as mu current hsf is only 8cm 2800rpm. I do have good thermally controlled case fans but. Its very quiet too, that is until 32 c when the thermistor kicks in and the case tries to take off when the fans rev up ! Fun but ;-) cheers __________________ My Racing Simulator G25 Cockpit Build

21st March 2002, 1:55 PM	#15
Rogue Old Member Join Date: Dec 2001 Location: Kellyville NSW Posts: 3,679	Dual XP1700s - Alpha PAL6035 Heatsinks with YSTech 4500RPM fans. Ambient : 24deg Motherboard : 28deg CPUs : 44deg & 46deg All temps are full load (SETI). __________________ In a perfect world... spammers would get caught, go to jail, and share a cell with many men who have enlarged their penises, taken Viagra and are looking for a new relationship. Power corrupts. Power failure corrupts absolutely.