Best cooler for duals and quads? - Page 28

Muzwa Kai · 28th August 2007, 6:26 PM

damn, they're some nice temps for air

trevor68 · 28th August 2007, 6:34 PM

Its in a cramped case too, temps measured with Intels Thermal Analysis Tool, its an E6850 BTW.

Should note that it varies with room temp, its a bit warmer in here now, but they are still 39 at the moment.

Muzwa Kai · 28th August 2007, 7:53 PM

Quote:

Originally Posted by trevor68

Its in a cramped case too, temps measured with Intels Thermal Analysis Tool, its an E6850 BTW.

Should note that it varies with room temp, its a bit warmer in here now, but they are still 39 at the moment.

just wondering how many volts you got going through that cpu?

i have an e6700 @ 3.66, with water. the black ice extreme II dual 120mm radiator, ehiem 1048 pump and danger den rbx waterblock.
about 1.7 vcore. it runs @ 48c idle, 58c 100% load.

@ stock vcore and clock, about 30c idle.

unfortunately it needs lots of volts, which heats it up a fair bit.

trevor68 · 28th August 2007, 8:28 PM

Its all stock as a rock in that regard, as per this post.

http://forums.overclockers.com.au/sh...d.php?t=604995

SLi_dog · 28th August 2007, 8:55 PM

Quote:

Originally Posted by trevor68

I am super impressed with the Tuniq, folding all day at 3.6gig 100%CPU, and cores are a nice 30 degrees!.

uh, what? That's highly unlikely.

Grab a copy of CoreTemp 0.95.4 and configure in settings to show the DTS readings (delta to Tjunction).

What do they read at full CPU load? (either folding or Orthos Small FFT)

Muzwa Kai · 28th August 2007, 9:09 PM

i just run wprime to see full load. it actually uses 100% of all cores. just set the thread count in advanced settings to the number of cores in your cpu. this program doesnt require full screen and is only a small program to download. you can check your load temps easily as its not full screen.

madcaow · 29th August 2007, 4:03 PM

fuck that tuniq is massive.

Atahu · 30th August 2007, 10:52 PM

Anyone tried the Tuniq in a Antec P180? Does it fit?

madcaow · 31st August 2007, 10:23 AM

im gunna get a tuniq. ive got a lianli a10b its freaking huge so it should fit!

havent seen a p180 but if its not any wider than a normal case it might be a bit of a squeeze!

Lord Davis · 31st August 2007, 10:39 AM

the tuniq is only .5cm larger than a big typhoon so if u can fit that then ur ok.

Daveee · 31st August 2007, 11:55 AM

FWIW I just ordered a Thermalright 120 Extereme which comes with the Blue LED Scythe. Also got a Scythe E as a rear case fan. Hope it works out OK!

k00k · 1st September 2007, 12:06 AM

Dunno if its the same dimensions as a P180, but I've just put a Tuniq Tower 120 in a P182, and it fits no worries at all. Ridiculously big cooler, I love it

Top case also. Well built, and very quiet.

DuaNo · 12th September 2007, 11:42 AM

Anyone know where one can get Scythe Infinitys from?

PcCaseGear does not have Intel version at the moment or so they told me.

impact_player · 12th September 2007, 12:13 PM

Quote:

Originally Posted by DuaNo

Anyone know where one can get Scythe Infinitys from?

PcCaseGear does not have Intel version at the moment or so they told me.

IMHO, Go the Ultra 120 Extreme instead. It'll be better (if you can fit it - otherwise the new Ultima-90 is almost as good) and it costs pretty much the same - PCManiacs has them for $70.

prophey · 12th September 2007, 11:18 PM

Hey guys,

Not sure if this is right or not, I just helped a friend build his PC... E6750, P5K and Scythe Ninja and Artic Silver 5... bios reports the CPU to be sitting at 19degrees..

Then again, he needs to update the bios because it's giving the uCode error.. not sure if this will affect the proper reporting of temps.

28th August 2007, 6:26 PM	#406
Muzwa Kai Member Join Date: Jun 2005 Location: brisbane Posts: 2,294	damn, they're some nice temps for air __________________ i7 870 @ 4280mhz danger den - 8gb 2140mhz 9-9-9-24-2t - 2x asus 5870 - asus P55 deluxe - SONY 55" LCD - xbox 360 gamepad - logi 510 - razer mamba

28th August 2007, 6:34 PM	#407
trevor68 Member Join Date: Jun 2001 Location: Canberra Posts: 3,358	Its in a cramped case too, temps measured with Intels Thermal Analysis Tool, its an E6850 BTW. Should note that it varies with room temp, its a bit warmer in here now, but they are still 39 at the moment. __________________ Junglewraiths Gaming http://folding.extremeoverclocking.c.../un=boky/t=24/

28th August 2007, 8:28 PM	#409
trevor68 Member Join Date: Jun 2001 Location: Canberra Posts: 3,358	Its all stock as a rock in that regard, as per this post. http://forums.overclockers.com.au/sh...d.php?t=604995 __________________ Junglewraiths Gaming http://folding.extremeoverclocking.c.../un=boky/t=24/

28th August 2007, 9:09 PM	#411
Muzwa Kai Member Join Date: Jun 2005 Location: brisbane Posts: 2,294	i just run wprime to see full load. it actually uses 100% of all cores. just set the thread count in advanced settings to the number of cores in your cpu. this program doesnt require full screen and is only a small program to download. you can check your load temps easily as its not full screen. __________________ i7 870 @ 4280mhz danger den - 8gb 2140mhz 9-9-9-24-2t - 2x asus 5870 - asus P55 deluxe - SONY 55" LCD - xbox 360 gamepad - logi 510 - razer mamba

29th August 2007, 4:03 PM	#412
madcaow Member Join Date: Jul 2006 Location: the rings around saturn Posts: 467	fuck that tuniq is massive. __________________ world, world, I sit in my room…imagine the future http://www.dubstep.com.au - Australian Dubstep Forums http://www.thelittlemule.com - Bikes and Coffee

30th August 2007, 10:52 PM	#413
Atahu Member Join Date: Jul 2005 Location: Canberra Posts: 154	Anyone tried the Tuniq in a Antec P180? Does it fit? __________________ i7 930 @ 3.8Ghz \| ASUS Rampage Extreme III \| 6GB Corsair CMG6GX3M3A1600C7 Dominator GT \| Gigabyte GTX 670 OC \| ASUS Xonar Essence STX \| Corsair Obsidian 800D Case \| Corsair HX-1000 PSU \|

31st August 2007, 10:23 AM	#414
madcaow Member Join Date: Jul 2006 Location: the rings around saturn Posts: 467	im gunna get a tuniq. ive got a lianli a10b its freaking huge so it should fit! havent seen a p180 but if its not any wider than a normal case it might be a bit of a squeeze! __________________ world, world, I sit in my room…imagine the future http://www.dubstep.com.au - Australian Dubstep Forums http://www.thelittlemule.com - Bikes and Coffee

31st August 2007, 10:39 AM	#415
Lord Davis Member Join Date: Aug 2003 Location: Brisbane Posts: 962	the tuniq is only .5cm larger than a big typhoon so if u can fit that then ur ok. __________________ Gigabyte P35 DS4 \| Intel Q6600 G0 \|Tuniq Tower \| 4GB Crucial 5300 DDR II \|Albatron 8800GTX 768mb (650/1045) \| Seagate 320G SATAII 7200.10 \|Pioneer 111DSV DVD+/-RW \| Silverstone EPS Modular 600w \|Thermaltake Xaser III V2000+ \| 2x Dell 2407WFP-HC LCD \|DNTV Live! Pro DVB-T \| Logitech MX3200

31st August 2007, 11:55 AM	#416
Daveee Member Join Date: Jan 2002 Posts: 278	FWIW I just ordered a Thermalright 120 Extereme which comes with the Blue LED Scythe. Also got a Scythe E as a rear case fan. Hope it works out OK! __________________ Intel E6750 @ 3.2 + Thermalright 120 Extreme \| 4 x 1gb Corsair DDR2 800Mhz \| Gigabyte S3L \| Gigabyte 8800GTS 512 @ 750/1875/1047 \| 2 x Seagate Barracuda 320GB SATA \| Corsair HX620 \| Leadtek DVT1000T TV Tuner \| Logitech G5 + G15 + Momo + Z-2300 \| Scythe fans all around

1st September 2007, 12:06 AM	#417
k00k Member Join Date: Sep 2001 Location: Perth, Australia Posts: 1,244	Dunno if its the same dimensions as a P180, but I've just put a Tuniq Tower 120 in a P182, and it fits no worries at all. Ridiculously big cooler, I love it Top case also. Well built, and very quiet.

12th September 2007, 11:42 AM	#418
DuaNo Member Join Date: Feb 2003 Location: Sydney Posts: 553	Anyone know where one can get Scythe Infinitys from? PcCaseGear does not have Intel version at the moment or so they told me. __________________ Go with DuckDuckGo! the Internets new search engine! Successful Trades: GreasyBear, azn_007 Last edited by DuaNo; 12th September 2007 at 11:59 AM.

12th September 2007, 11:18 PM	#420
prophey Member Join Date: Jul 2001 Location: Brisbane, QLD, AU. Posts: 527	Hey guys, Not sure if this is right or not, I just helped a friend build his PC... E6750, P5K and Scythe Ninja and Artic Silver 5... bios reports the CPU to be sitting at 19degrees.. Then again, he needs to update the bios because it's giving the uCode error.. not sure if this will affect the proper reporting of temps. __________________ Bleh