Cant adjust DDR2 voltage on 965P-DS3P

DUAL · 4th August 2007, 12:09 AM

Hi,

Since sticking in my Geil 6400C PC800 CL5 modules into this board the DDR2 Overclock Voltage has been preset at +.300, the thing is it's a pink colour and I can't change it even after changing voltage settings to manual. I just purchased another 2 x 1GB sticks of exactly same memory (total 4GB) and PC is blue screening at current FSB (Ok stock default) so I want to up the voltage up a notch to see if it makes a difference Bios is F5, heard though it's very difficult to get decent OC timings with 4 sticks.

Any info on changing DDR voltage though would be good.

Cheers

Whisper · 4th August 2007, 3:16 AM

ctrl-F1 before going into the overclocking menu

DUAL · 4th August 2007, 8:55 AM

Yes I'm aware of the Ctrl + F1 as I can change all my other settings & voltages it's just DDR2 overvoltage which wont allow me to change it.

Quote:

Originally Posted by Whisper

ctrl-F1 before going into the overclocking menu

antari · 4th August 2007, 1:31 PM

Tried clearing CMOS? Can't say I've ever come up against this problem.

terrastrife · 4th August 2007, 1:51 PM

its running at 2.1v if its at +0.3, which means thats correct (in range, ...just) anyway.

i run 4x1gb a-data ddr2 800 modules at 1.8v fine.. but im timed default and memory is at 400 so all in spec (i run 400x8 mem multiplier at 2.0).

4th August 2007, 12:09 AM	#1
DUAL Member Join Date: Aug 2001 Location: sydney Posts: 142	Cant adjust DDR2 voltage on 965P-DS3P Hi, Since sticking in my Geil 6400C PC800 CL5 modules into this board the DDR2 Overclock Voltage has been preset at +.300, the thing is it's a pink colour and I can't change it even after changing voltage settings to manual. I just purchased another 2 x 1GB sticks of exactly same memory (total 4GB) and PC is blue screening at current FSB (Ok stock default) so I want to up the voltage up a notch to see if it makes a difference Bios is F5, heard though it's very difficult to get decent OC timings with 4 sticks. Any info on changing DDR voltage though would be good. Cheers

4th August 2007, 1:31 PM	#4
antari Member Join Date: Aug 2006 Location: Vic Posts: 1,182	Tried clearing CMOS? Can't say I've ever come up against this problem. __________________ PC: 3930K @ 4.5 (NH-D14) \| Rampage IV Gene \| 16GB RipjawsZ 1866C9 \| 6970 2GB \| Xonar Essence STX \| 2x Intel 520 240GB RAID0 \| Seagate 3TB \| TJ08-E \| AX850 Peripherals: Alienware AW2310 (120Hz) \| Ducky DK9008 Shine II (Cherry Browns) \| Razer DeathAdder + Puretrak Talent \| ATH-AD700

4th August 2007, 1:51 PM	#5
terrastrife Member Join Date: Jun 2006 Location: ADL/SA The Monopoly State Posts: 15,947	its running at 2.1v if its at +0.3, which means thats correct (in range, ...just) anyway. i run 4x1gb a-data ddr2 800 modules at 1.8v fine.. but im timed default and memory is at 400 so all in spec (i run 400x8 mem multiplier at 2.0). __________________ D90/35mm1.8/SB900 Main/X58-USB3 F5/4GHz i7 950/48GB RipjawsZ/GTX 670/SSD 520 Series unRAID5/X2 4000+/30TB/16 Disk MidiTower/NeoHE