Xtreme Cooled Case Gallery

[alyxander]

Originally Posted by fuller2002

Can i ask why you chose to mount the rad that way you did? I would of placed it the other way around, i think it would look cleaner, and it would be really easy for you to do even though you have already set up the system.

BTW. The rig looks fantastic with the black and green

Cheers man. Um mounted the rad like that so that the tubes make a loop easier i guess, if it was the otehr way i'd have to use more tubing (i ran out) so yea that was the most logical way i could think of.


+1 for the DB1 pump also, its solid and silent well i used to have the MCP650 which sounded like bats in my bedroom.. not cool.

[RnegadeVyp3r]

Originally Posted by alyxander

Um mounted the rad like that so that the tubes make a loop easier i guess

I think he means why didnt you put the barbs towarads the case, like i did on my games rig... heres a apic

Originally Posted by DavLe.BeRRy

Vyper what coolant is that? i'm looking for a nice DARK RED myself

See Pic Above for other rig using the samea stuff, a bit darker tho.

Nulon Read FTW which i got from my local Autobarn for about $10 for a 1lt bottle, that would make up about 2-3 loops. I use it in both my rigs and so far i am happy. I am going to make it slightly darker and put a UV Light in it this arvo, i will post up another pic in the "Nulon Red" thread thats lieing around here.

Originally Posted by .:HM:.

yea vyper you def have a nice neat WC rig.

Cheers. Not bad a for a old hack job casea

just one thing though: I can't believe how well ONE rad is keeping ur CPU nice temps and your feeding it 1.4 volts... have you gone much higher yet?[/QUOTE]

Yea, it is doing a good job which is good to see. I bet if it was a Quad like in my other rig it would be a bit warmer

[sathe]

Originally Posted by DavLe.BeRRy

that's factory on the P182SE

Do you have any ideas where i could get the inside of my case Powder-Coated black like that?
Im using a Lianli- PCa10 with a case window and think it would look amazing.

[DavLe.BeRRy]

Originally Posted by sathe

Do you have any ideas where i could get the inside of my case Powder-Coated black like that?
Im using a Lianli- PCa10 with a case window and think it would look amazing.

I think a handful of people on the forums have had their cases powercoated..
Can't name names though you'll just have to ask around, Me? I can't think of anywhere you'd be able to get it done, sorry

[RnegadeVyp3r]

Here we go... UV Lights put in and coolant replace and 1/2" Barbs are now in through the whole loop

[DavLe.BeRRy]

Wow that IS a nice red
I'm confused though (about the pics and what you said)

Originally Posted by RnegadeVyp3r

coolant replace and 1/2" Barbs are now in

By the looks of it at the top and bottom of the case u have lengths of tubing with barbs stuck in the.. somehow glowing blue, care to explain?

[Apokalipse]

Originally Posted by DavLe.BeRRy

By the looks of it at the top and bottom of the case u have lengths of tubing with barbs stuck in the.. somehow glowing blue, care to explain?

they're cathode lights.

[RnegadeVyp3r]

Heres another pic of em without them being turned on - this might help you see what they look like normally.

Also, before i had the Rad outlet and pump inlet as 3/8" Barbs but i have since thrown 1/2" barbs in there to replace them

http://i194.photobucket.com/albums/z...PCstuff006.jpg
http://i194.photobucket.com/albums/z...PCstuff004.jpg

Taken from the Nulon Red Thread
http://forums.overclockers.com.au/sh...=250422&page=7

Apokalipse - Thats a moster case and a weird spot to mount the pump, i have never seen em mounted there before. Very neat n tidy but i swear those GPUs are hanging to be throwing into the loop also

[alexc2005]

holy crap those cathodes are thick!, does it doo much better than a normal cathode?

doesnt look like it does..

lol @ dave for thinkign they were tubes

[RnegadeVyp3r]

Originally Posted by alexc2005

holy crap those cathodes are thick!, does it doo much better than a normal cathode?

doesnt look like it does..

They are meant for a Car They are Aepro brand and they do a resonable job. I just chopped off the 12v car plug and wired it up to the Floppy Disk power plug and i threw in a toggle switch that i mounted on top of the case so i can control em

I thought i would do it as this is just a "hack" case and i wasnt fussed about it.

[alexc2005]

Originally Posted by RnegadeVyp3r

They are meant for a Car They are Aepro brand and they do a resonable job. I just chopped off the 12v car plug and wired it up to the Floppy Disk power plug and i threw in a toggle switch that i mounted on top of the case so i can control em

I thought i would do it as this is just a "hack" case and i wasnt fussed about it.

right so they dont actually work better than a computer made one?

[RnegadeVyp3r]

Originally Posted by alexc2005

right so they dont actually work better than a computer made one?

No Idea, i imagine they are the same basically. I dont have a comp store locally that has em and had the money in my pocket burning a hole so i got em when i got some more coolant.

For $15 each, they do the job. With the Blue die i have they do a better job, the Red doesnt react the best IMO but its still better then Green

[JPHarvey]

Here is my compact addition to the mix....

Computer Bits:

Case - Antec Nine Hundred
CPU - E6600
MoBo - P5N32-SLI Premium
RAM - XMS2 DDR-800 4-4-4-12
GPU - XFX 8800GTX SLI

Cooling Bits:

CPU - D-Tek Fuzion
GPU - 2 x EK8800 Full Block
Rads - 1 x Swiftech 120, 1 x Swiftech 220
Pump - Swiftech Laing D5
Res - Swiftech Micro

Piccies









Not overly impressed with the temps, particularly seeing as nothing is overclocked...But I was really after a quieter PC (temps are still better than air though! )...

[Benno1988]

Buy yourself a dual rad

[DavLe.BeRRy]

Originally Posted by Benno1988

Buy yourself a dual rad

if u read his post you'd know theres an MCR120 on the back and an MCR220 (120.2) up the front. You can tell in the pics.

fricken nice build btw mate