2500K/2600K/2700K ranking and discussion thread. - Page 5

L.B.C · 30th January 2011, 3:04 PM

Quote:

Originally Posted by Dropbear

Gigabyte GA-P67A-UD4

PM dino22 he works for gigabyte and might help with the LLC problem.

aussie-revhead · 30th January 2011, 3:23 PM

Thats not bad really, I have seen much worse over the years. Dropbear, what is your vcore set to in bios?

Azzan · 30th January 2011, 3:35 PM

I need ~1.34v to run 4.5GHz, (i5 2500K, L048A952).
Prime95 30mins = 43/75C idel/load with Noctua NH-U12P SE2, 27C ambient temp.

Got 25298 on 3DMark06 1.2 @ 4.5GHz on Gigabyte P67A-UD3P with 1G Powercolor 5850 PCS+(@ stock).

no1joey · 30th January 2011, 3:51 PM

Have my i5 2500 @ 4 Ghz Multi x 41 @ 100Mhz, auto voltage, and its stable as and am happy leaving it there. For those that like to play it safe, probably the safest way to go with OC your i5 2500 IMO

L.B.C · 30th January 2011, 3:54 PM

Quote:

Originally Posted by no1joey

Have my i5 2500 @ 4 Ghz Multi x 41 @ 100Mhz, auto voltage, and its stable as and am happy leaving it there. For those that like to play it safe, probably the safest way to go with OC your i5 2500 IMO

That is 4.1GHz(100x41=4100) Not 4.0GHz

no1joey · 30th January 2011, 3:57 PM

Quote:

Originally Posted by L.B.C

That is 4.1GHz(100x41=4100) Not 4.0GHz

I know weird huh!! when I go 40x it says 3.9 Ghz, and when I go 41x it says 4.0 Ghz ???

kifsteve · 30th January 2011, 3:58 PM

i haven't tried to push it any further than this so i dont know if this is appropiate for this thread but:

4500 (MHz) - 1.32 - 45 x 100 - 2500k - L048A961/D2 - Asus P8P67 Pro - 4500/1.32 - 35idle/65load megahalems (27ambient)

L.B.C · 30th January 2011, 4:10 PM

Quote:

Originally Posted by no1joey

I know weird huh!! when I go 40x it says 3.9 Ghz, and when I go 41x it says 4.0 Ghz ???

do you have a CPUz screenshot? I have never heard of this before.

Dropbear · 30th January 2011, 4:14 PM

Quote:

Originally Posted by aussie-revhead

Thats not bad really, I have seen much worse over the years. Dropbear, what is your vcore set to in bios?

When I set it to 1.305 or 1.31 it drops to 1.28 in HW monitor. When I tried on 1.305 it ended up crashing after 20 minutes. (may have dropped to 1.27).

When I set it to 1.265 in BIOS (42x100) it only drops to 1.25 in HW Monitor under load.

(HW monitor correctly shows it as BIOS core voltage before load is applied - and after load is applied as well (ie back to idle))

no1joey · 30th January 2011, 4:28 PM

Quote:

Originally Posted by L.B.C

do you have a CPUz screenshot? I have never heard of this before.

no says in the windows system settings in contorl panel

L.B.C · 30th January 2011, 5:04 PM

Quote:

Originally Posted by no1joey

no says in the windows system settings in contorl panel

Sounds like a motherboard problem or you might need to update your bios. because if you have Vdroop control on high. it should have a higher voltage at load.

no1joey · 30th January 2011, 5:14 PM

the motherboard seems to work fine,

in the mobos utility easy tune, the cpu clocks & multiplier change every second, and the voltage adjusts itsself accordingly.

Just bought the hardware yesterday and they MEM tested everything and hardware, .... ?

Skramit · 30th January 2011, 5:14 PM

Have ppl been touching PLL voltage much or any other settings? I wonder if tweaking some other voltages might help.

no1joey · 30th January 2011, 5:25 PM

no, all voltage settings are on auto

btw, in CMOS, its shows correct Ghz, 40x - 4.0, 41x 4.1 etc, just in windows control panel it shows 0.1 Ghz lower.... Maybe because the mem speed is not 4000? eg 3989 mhz? maybe it rounds down ?

L.B.C · 30th January 2011, 5:30 PM

Quote:

Originally Posted by no1joey

the motherboard seems to work fine,

in the mobos utility easy tune, the cpu clocks & multiplier change every second, and the voltage adjusts itsself accordingly.

Just bought the hardware yesterday and they MEM tested everything and hardware, .... ?

Well there must be some thing wrong with the board if it still drops in vol6tage when load line is enabled.

30th January 2011, 3:23 PM	#62
aussie-revhead Member Join Date: Feb 2005 Location: Western Sydney Posts: 13,706	Thats not bad really, I have seen much worse over the years. Dropbear, what is your vcore set to in bios? __________________ Bench 1- R4F - 3930K - Team 2400c9 - Sapphire 7770 Ghz Edition - Enermax Revo1250 - water cooled tech bench - Samsung S27A950D Netbox - waiting on Haswell parts ... - 4x2TB on Highpoint RAID - Lian Li v354 matx - Water cooled BF3: OZrevhead

30th January 2011, 3:35 PM	#63
Azzan Member Join Date: May 2009 Location: Melbourne Posts: 1,040	I need ~1.34v to run 4.5GHz, (i5 2500K, L048A952). Prime95 30mins = 43/75C idel/load with Noctua NH-U12P SE2, 27C ambient temp. Got 25298 on 3DMark06 1.2 @ 4.5GHz on Gigabyte P67A-UD3P with 1G Powercolor 5850 PCS+(@ stock). __________________ i5 3570K, NH-D14, Z77X-D3H, 8GB Ripjaws 2133, GTX680 TF3, 7TB Seagate, HX650, S23A700D Diablo 3: http://us.battle.net/d3/en/profile/a.../hero/22176129 \| Crysis 3: http://crysis3s.com/stats_pc/B4NK41

30th January 2011, 3:58 PM	#67
kifsteve Member Join Date: Nov 2007 Posts: 63	i haven't tried to push it any further than this so i dont know if this is appropiate for this thread but: 4500 (MHz) - 1.32 - 45 x 100 - 2500k - L048A961/D2 - Asus P8P67 Pro - 4500/1.32 - 35idle/65load megahalems (27ambient) Last edited by kifsteve; 30th January 2011 at 4:03 PM.

30th January 2011, 5:14 PM	#73
Skramit Member Join Date: Oct 2004 Location: Melbourne Posts: 1,329	Have ppl been touching PLL voltage much or any other settings? I wonder if tweaking some other voltages might help. __________________ MAIN: Intel Core i7 2600K @ 4.7GHz\| ASRock P67 Extreme6 B3 \| Fractal Design R3 \| Thermaltake 750w \| Prolimatech Megahalems \| 8GB G.Skill Ripjaws XL DDR3 1600 \| EVGA GTX680 \| OCZ Vertex 2 120GB \| Crucial M4 256GB \| 4 HDD (6.0TB) \| Win 7 Pro HTPC: Intel Core i3 2100T 35W \| ASRock H67M-ITX-HT B3 \| 4GB G.Skill DDR3 1600 \| OCZ Vertex 2 60GB \| WD Scorpio Blue 320GB \| Antec ISK-100 ITX \| DigitalNow TinyTwin TV Tuner \| Win 7 HP

30th January 2011, 3:51 PM	#64
no1joey (Banned or Deleted) Join Date: Feb 2007 Posts: 510	Have my i5 2500 @ 4 Ghz Multi x 41 @ 100Mhz, auto voltage, and its stable as and am happy leaving it there. For those that like to play it safe, probably the safest way to go with OC your i5 2500 IMO

30th January 2011, 5:25 PM	#74
no1joey (Banned or Deleted) Join Date: Feb 2007 Posts: 510	no, all voltage settings are on auto btw, in CMOS, its shows correct Ghz, 40x - 4.0, 41x 4.1 etc, just in windows control panel it shows 0.1 Ghz lower.... Maybe because the mem speed is not 4000? eg 3989 mhz? maybe it rounds down ?