res/pump not straight

Discussion in 'Extreme and Water Cooling' started by mixsetup, Feb 16, 2017.

  1. mixsetup

    mixsetup Member

    Joined:
    Dec 22, 2003
    Messages:
    2,541
    Location:
    Wynyard Tasmania
    Hi there any suggestions how to get it straight?
    https://www.dropbox.com/s/obhex1jxxgud85q/res.jpg?dl=0

    I thought when I put tubing in it will end up straight but what I have seen on YouTube it will just force the tube to be pushed down a bit.
    Oh it will be rigid tubes.

    Thanks
     
    Last edited: Feb 17, 2017
  2. Moptimus

    Moptimus Member

    Joined:
    Aug 22, 2011
    Messages:
    1,095
    Location:
    Nambour-by-the-Sea
    It is hard up against the 4 x CDRW or whatever other piece of antiquated tech that is in the bay above.

    Either pack it out from where you have mounted it, get a usb dvd drive, or go all tower of pisa and shit.
     
  3. mixsetup

    mixsetup Member

    Joined:
    Dec 22, 2003
    Messages:
    2,541
    Location:
    Wynyard Tasmania
    Hi there no it's not hard against the Blu-Ray bay there is an inch or so gap. The bottom where it is mounted is the surround bit which holds the hard drive cradle/bays.
    Think I might have to just redo it an see if it sits flat or the screw holes I drilled are flat and no bits of mettal sticking out as there has to be something I'm not seeing or thinking of. Thats all I can think of.

    Thanks
     
  4. mixsetup

    mixsetup Member

    Joined:
    Dec 22, 2003
    Messages:
    2,541
    Location:
    Wynyard Tasmania
    Thanks going to just pack it out.
     

Share This Page