running 4770k ATM(on water), can do 4.5 at around 1.3V, but run it at 4.2. Yeah, mine's not a great clocker but the updated xx90 chips were...
isnt the igpu on the cpu.I'd pull the cpu and check closely for bent pins too
have you tried loading the win 7 x64 HD2000 drivers?
have you run a check disk or command chkdsk
small ssd for OS
optional add 8GB ram
see how it goes
you can still take those parts(apart from ram) to a new build
"A bug with the installing...
IMO, having gpu heatpipes near your tubing will not make one iota of difference in temps. The plastic tubing is a very good insulator.
I would not...
silverstone sell the front usb3 as a drop in kit for older cases.
Hmm... seems to have disappeared on their site.IIRC it was a regular dual usb3 +...
thx. System still running fine.
Side fan now has a protective grill
Just recently flushed the system and cleaned both blocks.
if you're going 1060, go 6GB vram, NOT the 3GB models
tried removing/reseating all power related connectors?
Currently using a Cascade on my 1070
you might try posting this in the electronics and electrics subforum, as your questions are more technical.
Maybe change the title eg "want to...
4 - LM conductonaut might get you 5-10C better, hell even just replacing the existing goop with some better stuff
+1 havabeer's method, is what i use, although my blocks are only tensioned effectively at two points.Less chance of misalignment.(DIY mounts)
i used this when starting out with my 4770k
Most recommend not going over 1.3V ,...
i tried running my 4770k naked, but didn't like the fitting/refitting procedures.If Intel chips still had cpu pins and a solid mounting like AMD,...
most of the time, black screen and audio looping is GPU related IMO.
Is it a full cover block on the ti ?
As above, if poss. reseat all power...
run the gpuz render test or a game, and see if the bus interface speed comes up to x16 3.0
you have the GPU in a x16 slot? PCIE gen 3 enabled in...