Does it have a HDD light? Does that do "stuff" while it would normally be booting? That would suggest it's starting up, but without a display....
Actually, two of the three 3.3V pins are still 3.3V. One of them (pin 3) got repurposed for power-disable, but a "correct" system should still...
If they're going to release a new chipset (that doesn't work with older CPUs) and new CPUs (that don't work with older chipsets), then the ability...
Yes, it's essentially creating a whole new socket where neither CPU nor mainboard has any backward compatibility. It'd actually make more sense to...
I guess this sort of thing is expected as they expand the envelope (fifth time to space for that booster). Presumably they'll investigate it, find...
But SN-2 didn't! They did much the same test (all of a week later) and it passed. And now SN-3 is being stacked. At this rate they're going to...
Given the known limitations of the passwords (numeric fixed-length) you might be better-off looking at whether it would be practical to break into...
Feel free to send me a PM with the specs, but it'll have to be a very small PCB because I'm working on my own PCB currently.
No. The LED doesn't restrict current at all - it'll use all you can give it (until it dies, which will occur at slightly more than 20mA). The...
I don't see (a) why they're bothering with cartridges at all, and (b) why "unique cartridges" is a feature worth advertising. I suspect that if...
The wood will handle the temperature, but the drives will get far hotter than they should be if they're sandwiched between pieces of wood with no...
I'll be interested to see how you go with the bed levelling. There seem to be a bunch of options, each with its limitations: - Optical -...
I wonder why they're sticking with 12V. Just about the only thing that uses it now are spinning disks, and they could probably be switched to a...
I went to a BTT SKR E3 DIP on my CR-10, with TMC2208 drivers (the TMC2209 apparently had some issues on 12V? Not sure if they've been resolved)....
The burst discs (and the check valves they replaced) are just for startup, to prevent getting fuel/oxidiser mixing in the pipes before they're...
So, something like $1B saved so far? At about $30M for a new first stage, and assuming $10M average overhaul cost. That cost will probably drop...
If you go to Bunnings, they have this nifty foam tube designed for insulating hot water pipes......
You're not losing any performance here. The problem is simply that the FX5200 was Nvidia's answer to "how slow can a video card be before people...
I notice that the CR-10 is now on eBay at <$330 (eg. here, although there are lots of sellers listing them). These claim to have the V2.1 board...
It wouldn't surprise me if the burst discs are simply "get this project moving so NASA can launch astronauts with it". Because they're so...
