Discussion in 'Hobby Engineering' started by aXLe, Jun 16, 2013.
Thanks mate. Sounds good. DM me with an idea on how much $ for your time and materials.
hi everyone, I'm hoping someone can print 2 of these fan spacers in black:
It's the same as this one (except 12mm), and here's the thread I found it in.
I'm in 3011 if anyone happens to be close enough for a pickup
Has anybody dabbled in the fine art of 5.25" or 3.5" bay PCIE adapters?
I'm thinking about a SFF build and putting one or more nic's on the front. I'm a 3d printing ignoramus.
Lads indicated that models still in work. Might still need a bit of tweaking still.
I'm not local, if you have no one else offer pm me. Easy prints.
I'm outside 5k in 3146 but can do them and post. send me a PM if keen
Does anyone here print with ASA material?
I bought a 1kg roll of red ASA without realising when I needed PLA.
If anyone in Melb is keen on a swap by any chance for red or another colour you have spare that I might need?
Where in Melbourne are you? I'm in Mount Waverley. I'm sure I could swap you something.
If I produced something in sketch-up, would that be able to be used for 3D printing?
Google - sketch up to stl
Looks to be an option.
Well first A: i cant believe i actually found this item as a file - because B: its a reaally old 80's iKea table that i found in an alley a decade ago
It has a flaw tho - the injection molded spacer clips for the glass top tended to brittle with age & snap. So I'm looking for a complete set replacement, 10 in all, of this fiddly little bit of plastic.
I have ONE left - as you can see its in a silvery grey slightly sparkly plastic - but any rough approximation light/mid grey would do.
I dont know the etiquette for this particular thread, as I've never had the pleasure of needing it before - so go gentle with me.
Im in inner city sydney - i also enjoy latte's.
cheers - BB
I have some Silver PLA that I could print them with, but not sure on its UV stability if its going to be in direct sunlight.
no sunlight - its used only inside
I've done it years ago, I've even sold some things I modeled in Sketchup but it's not ideal and a bit clunky (though I haven't used anything past Sketchup 2016 before it went fully cloud based so maybe it's improved. If it's a one off or occasional thing then go for it otherwise it'd be well worth learning something like Fusion 360 which I've been doing the past couple of months.
Easy then, pm me if you like, i can post them to you
If you have something you wanted drawn up and it's not complicated I can do that for you but I'd recommend learning something as you go.
Only my opinion but until I did the solidworks course I sold my 3d printer out of boardem. Now it's a necessary tool I could not do without and have 2.
You can export .stl files from Sketchup when newly installed, it's basically a 30 day trial of the Pro version which gives you many more export options, among many other extra functions of course.
Chasing a few prints, prefer PLA, open to filament colour choice. However prefer black/white
2 x https://www.thingiverse.com/thing:4753682 prints of both left and right
1 x https://www.thingiverse.com/thing:4791546
2 x https://www.thingiverse.com/thing:4283322 prints of both left and right
Happy to discuss costs, located in Newcastle so post preferable.
hey team, chasing
2x https://www.thingiverse.com/thing:3483551 - one black, one white if possible. both black OK
1x https://www.thingiverse.com/thing:4368740 - no need for the knob, but if it's easy to print everything then that's OK
pick up or posted to brissy OK
I might be able to help out with this. I'll just confirm the size when I'm on the computer next and let you know. Might be a bit big for what I can do but I'll check
I can help out with these. I'll message you tomorrow to confirm details. Cheers!
Hey mate had this sorted by another member and forgot to post here. Cheers!!