1. OCAU Merchandise is available! Check out our 20th Anniversary Mugs, Classic Logo Shirts and much more! Discussion in this thread.
    Dismiss Notice

DFI DK X48-T2RSB Plus > E8600 @5146Mhz H20

Discussion in 'Intel x86 CPUs and chipsets' started by eva2000, Oct 28, 2008.

  1. eva2000

    eva2000 DDR1/DDR2/DDR3 Addict

    Joined:
    Jun 27, 2001
    Messages:
    21,977
    Location:
    Brisbane, Australia
    [​IMG]

    Been playing with my DK X48-T2RBS Plus and fsb wise it's much better than previous DFI boards I have played with P35/X38/X48 which got stuck around 500-510FSB 32M Pi, while this board manages 563FSB 32M Pi http://i4memory.com/showthread.php?t=10937 :)

    Max validation @571FSB so far:

    [​IMG]

    [​IMG]

    [​IMG]
     
  2. OP
    OP
    eva2000

    eva2000 DDR1/DDR2/DDR3 Addict

    Joined:
    Jun 27, 2001
    Messages:
    21,977
    Location:
    Brisbane, Australia
    Memory clocking ain't half bad either :D

    tRD/Performance level = 7

    2x1GB Teamgroup PC2-10400 CAS6 @701Mhz 5-5-5-18 at 2.675v

    [​IMG]

    [​IMG]

    2x1GB Crucial Ballistix PC2-8500 Tracer Micron D9GMH @698Mhz 5-5-5-18 at 2.65v for CPUZ Validation

    [​IMG]

    [​IMG]


    [​IMG]

    Teamgroup PC2-10400

    [​IMG]

    [​IMG]

    Crucial Ballistix PC2-8500 Tracer

    [​IMG]

    [​IMG]
     
  3. OP
    OP
    eva2000

    eva2000 DDR1/DDR2/DDR3 Addict

    Joined:
    Jun 27, 2001
    Messages:
    21,977
    Location:
    Brisbane, Australia
    Max 32M Pi & Max CPUZ Validation
    on H20

    Time to push the E8600 Q820A599 *0464 cpu and Crucial Ballistix PC2-8500 Tracer memory and they certainly didn't disappoint - max highest H20 cooled Super Pi 32M yet @5093Mhz! To think this E8600 Q820A599 *0464 only did max Super Pi 1M @4952Mhz and max validation @5079Mhz at 1.552v idle on Gigabyte EP45-Extreme with exact same cooling setup.

    Even better than my E8600 Q820A599 *0537 which did Super Pi 32M @5003Mhz at 1.568v idle with max CPUZ Validation @5146Mhz on DFI UT X48-T3RS DDR3 board.

    E8600 Q820A599 *0464
    • Max CPUZ Validation @5146Mhz at 1.600v idle / 1.568v load
    • Super Pi 32M @5093Mhz at 1.600v idle / 1.568v load
    • Super Pi 32M @5025Mhz at 1.552v idle / 1.520v load

    @5146Mhz

    [​IMG]

    [​IMG]

    @5093Mhz - click image for full screenshot

    [​IMG]

    [​IMG]

    @5025Mhz - click image for full screenshot

    [​IMG]

    System:
    • E8600 Q820A599 0464
    • CPU Cooling: Dtek Fuzion Rad Tower Box
    • DFI LP DK X48-T2RBS Plus - 9/23 beta bios
    • 128MB Gainward FX5200 PCI
    • 2x1GB Crucial Ballistix PC2-8500 Tracer double sided Micron D9GMH dual channel kit
    • Memory cooling: 120x25mm Thermaltake 81cfm fan
    • 750GB Samsung SATAII
    • Pioneer 215 DVD-RW
    • 1200W Silverstone OP1200
    • WinXP Pro SP2 Nlite Fully Updated.
     
  4. stablez

    stablez Member

    Joined:
    Apr 8, 2006
    Messages:
    4,037
    Location:
    Humidycrib
    thoses tracers just goe thru board to board.
    Its funny how strong computer hardware is.
    thus rat at 60c and it lives on.
    Wow over 1.6v on n.b.

    If you didnt bring out dfi.
    dfi will bring you out.
    Nice clocks on this weird little board.
    Do you think soon after the release of X58 there will be P55?:):):)

    eva ?
    Whats better 4-4-5-10 or 5-5-5-9
     
    Last edited: Oct 28, 2008
  5. OP
    OP
    eva2000

    eva2000 DDR1/DDR2/DDR3 Addict

    Joined:
    Jun 27, 2001
    Messages:
    21,977
    Location:
    Brisbane, Australia
    Yeah every overclocker needs a set or two of the old dual sided micron d9gmh crucial tracer's in their tool box :D

    No idea on P55

    as to timings all depends on

    1. memory frequency used
    2. divider used and thus FSB frequency
    3. tRD/performance employed
    4. chipset latencies and
    5. subtimings used

    :D

    clock for clock 4-4-4-x would be faster than 5-5-5-9 of course (on most boards)
     

Share This Page

Advertisement: