Pull for exhaust

Discussion in 'Extreme and Water Cooling' started by {V|PER}, Feb 3, 2019.

  1. {V|PER}

    {V|PER} Member

    Joined:
    Oct 18, 2006
    Messages:
    515
    Location:
    Melbs
    I'm having issues mounting a second rad in the top of my case. I could mount it pretty easy in a pull config? Rad on the inside, fans in the space between the chassis and the case (which has vents). Should I just take the path of least resistance and do that? I already have 420mm of rad plus this extra one so it's not like I'm short on rads.
     
  2. radeon_freak

    radeon_freak Member

    Joined:
    Sep 19, 2007
    Messages:
    3,152
    Location:
    Sydney
    Fans work more efficiently and best in a push configuration but will still work fine in a pull setup.

    I doubt you'd see much of a temp difference in push vs pull given the amount of rad surface area you already have.

    Just go with whatever fits.
     
  3. OP
    OP
    {V|PER}

    {V|PER} Member

    Joined:
    Oct 18, 2006
    Messages:
    515
    Location:
    Melbs
    Yeah thanks went with it as the other way was just to hard. Finishing off the drain port now.
     
  4. OP
    OP
    {V|PER}

    {V|PER} Member

    Joined:
    Oct 18, 2006
    Messages:
    515
    Location:
    Melbs
    All plumbed up and running well, 28 idle.
     

Share This Page