Hi guys and girls, i am planning to redo my watercooling system because i just ordered this morning some parts for my GPU. Costed me 300 euro's. Well here is what i have at the moment: Rig Specs OS: xp64 case: Lian Li A10 mobo: Asus Blitz Extreme cpu: Q6600 B3: 3.72 vcore 1.5x (Lapped may 5th, 2009, 11:15pm) psu: Thermaltake 1200 watt mem: Corsair 2x2gb dd3 1333 - 22.214.171.124 hd: 2x WD75gb raptor (raid0), 2xWD500gb (raid0) gpu: xfx gts 250 core edition 735mhz (stock) / rivatuner: 765mhz (stock) Razor: Mouse> Mamba / Mousepad> Destructor / Keyboard> Lycosa Liquid Cooling System Specs tubing size: 1/2 Connections radiator: Thermochill 120.3 pump: Laing D5-MCP655 cpu block: D-tek Fuzion v2 resevoir: DangerDen 5.25bay fan: 3xYate Loon 120mm D12SL (Pull config) & other fans case fan: Scyte 5'25 for front panel. shroud: TFC Xtender BLue Universal 120mm tube: Fesser UV High Flow en Flexible liquid: 4x Fesser 500ml VS.C (without UV=is better for cooling, that is what i read) -------------- Parts i ordered for my GPU are(some parts are for the current loop too like Crane): - Radiator: ThermoChill PA120.1 - 120 Single - TFC Herbie Clip / TubeClamp (1/2) kunststof Zwart - 13MM (1/2) EK High Flow Fitting - G3/8 - Anti bendingspring 19.1MM (1/2) Black PrimoChill - Universal GPU waterblock: EK-VGA Supreme - Plexiglass - and other more stuff, like Black Fesser Tubes and more Fittings i wont post. -------------- Here is photo of how my system is now: Here are some photos of the Rig that i took appart today, and also i removed the GPU stock cooling (sorry of the pictures are too big): GTS 250 + Stock Cooling GTS 250 GPU Chip RAM on GPU Stupid Loud Fan of Stock cooler Lian Li A10 case PSU Mobo & others Radiator Reservoir Pump & Other parts DDr3 Memory Pump & Res from old Thermaltake bigwater 760i for the 2nd loop ----------------------------- PLAN: I want to make some small modifications to my case so the tubing can go easier. I want to make 1 or 2 tubing holes for the pump. 1 That goes directly upward and straight ahead. and cut of on the side for cabling. i show u some pictures what i mean. Pump with cutting circles: The new radiator i was planning to put it in the 5'25inch front bay with the Thermaltake Pump&Reservoir ( i know these are not the best parts but i had it from my old watercooling config. So i thought just use that ) I will show more when i have my other parts tomorrow. I keep you up to date. Aeolas out, PEACE!