Super Pi 32M 4Ghz efficiency thread

Discussion in 'Overclocking & Hardware' started by sskmercer, Mar 19, 2008.

  1. youngpro

    youngpro Member

    Joined:
    Jun 18, 2006
    Messages:
    1,450
    yeah couldnt agree more

    for the past 12 months or so, if i have a successful session i take 5 minutes once i am done to record some dot points on what worked, what didnt, settings, etc

    i am finding when its time to rebench that benchmark or platform i can get back into it so much quicker
     
  2. zeropluszero

    zeropluszero Member

    Joined:
    Aug 6, 2008
    Messages:
    5,986
    Location:
    3132
    Im a profile saver generally, but then I try to load them and they dont work.
    FML right?
     
  3. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Why all the ddr4 gskill memory sell out so fast on pccg,I guess every man and his pc will be waiting for pre order now :p
     
  4. FatBoyNotSoSlim

    FatBoyNotSoSlim Member

    Joined:
    Sep 9, 2002
    Messages:
    14,056
    Location:
    Melbourne - 3149
    That or they ordered/allocated like 10 sets.
     
  5. zeropluszero

    zeropluszero Member

    Joined:
    Aug 6, 2008
    Messages:
    5,986
    Location:
    3132
    theres other stores guys.
     
  6. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Not always for me,I require postage to PO box,so au post
     
  7. zeropluszero

    zeropluszero Member

    Joined:
    Aug 6, 2008
    Messages:
    5,986
    Location:
    3132
    ah, shit then. :(
     
  8. OP
    OP
    sskmercer

    sskmercer Member

    Joined:
    May 5, 2003
    Messages:
    3,092
    Location:
    Brisbane, Sth Side
    I've also checked a heap of stores and have been told they are awaiting stock (GSkill).
     
  9. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Testing another kit of pis 2200 7-10-10 kit
    this kit also 2800 6-10-6-21 tight,not stable at these clocks yet but ok considering HS are still on the memory's and only -135

    [​IMG]

    Some Cl5 stability with these sticks,HS on -135
    [​IMG]
     
    Last edited: Oct 3, 2014
  10. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    little improvement on the Pentium

    Bullant - 7M 18.328 {Pentium G3258}, Ram @ 1377~ 6-9-6-21,Z97 Asrock OCF

    [​IMG]

    some 5ghz,should be able to push Mhz more on this later
    [​IMG]
     
    Last edited: Oct 5, 2014
  11. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Prepping Z97 OCF for another 32m round,my gem chip seems to be struggling when I try 5Ghz now,really need new chip with better imc.Testing another kit that Ive pre tested once,is a kit of 2000 pi cl6,they did like volts to 2.26 i think it was.

    Also received X99 OC Formula a little while ago just waiting on few more things then will post some results, big thanks to ASRock for there support

    [​IMG]
     
  12. robbo2

    robbo2 Member

    Joined:
    Jun 28, 2009
    Messages:
    2,462
    Location:
    Brisbane
    So how many of those 200 C6 sticks do you have now??
     
  13. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    I have posted once from this kit a little while ago 2800-2810 cl6 I think it passed but only tested once not long ago

    Hmmm,I have my normal good kit that I use most of the time,then I have 2x kits that I used on ivy and this kit here that I bought from ebay,was the low volt air kit.Have also 2X 2300 pi kits that good as well,need to test bobs kit with HS off they could be nice if they keep pushing volts like they did

    Evey kit is different in its own way,so....

    4x 2000 kits all 2800Mhz cl6 + some stronger then others
    2x 2300 kits 2800Mhz cl6
    2X 2200 kits

    Also have 6 more dims of 2000 pi cl6 to test under cold on Z97 that Ive had for awhile,2 kits of 3x2Gb kits,will test these kits soon.I think I briefly tested them with HS on on Z87 didn't think lot of them but Z97 seems to be pushing memory little further

    Just about every single kit of Pi PSC Ive tested will pass 2800Mhz cl6 or cl7,every single 4770K and a 4790K all pass 2800Mhz under cold testing.There was one 4770k that I didn't test cold that I think it was dud imc but only one.
    I am in no way bragging just sharing my findings :thumbup:
     
    Last edited: Oct 10, 2014
  14. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Those memory's I tested,just the second time on cold,
    pass 8m 2860 tight,also 14 loops of 32m
    No wazza on these runs
    Think with fresh OS and new chip I think this should pass 32M
    [​IMG]

    [​IMG]

    A pass with no wazza and no priority
    [​IMG]
     
    Last edited: Oct 11, 2014
  15. robbo2

    robbo2 Member

    Joined:
    Jun 28, 2009
    Messages:
    2,462
    Location:
    Brisbane
    Awesome dude :thumbup: Have you played around with the Asus board anymore?
     
  16. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    No not yet mate,I have to install ME driver I'm told to use the software within windows,will be testing it again very soon
     
  17. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    So I worked out how to run 4x PSC on OCF just by adjusting 2-3 sub timings
    Ran it on LN2 the other night and not so promising,I was able to just once boot 2800 7-10-7,no cl6 not even 2666,seems rtls,iols training was little harder,was worth a play with.Im sure I could get it to improve little more but not sure ill bother with 4x PSC,testing was on my chip that I know has weak imc,not sure if new chip would help tho
    [​IMG]
     
  18. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Here is 2x PSC sticks that Ive never tested on ln2,HS left on only -125 didn't get good mount so another -40 on top of this should be nice
    4X more sticks to test,will revisit with HS off

    [​IMG]
    [​IMG]


    Here is the other kit I tested tonight,this was HS off and -150 im guessing,the kit boots 2800Mhz 6-10-6 but not 32m stable in the quick test
    This is a kit I bought from these forums and never been happy with them,from when I bought them they may have been wounded
    The HS were also nearly falling of when I bought them,any how they seem to tighten up quite nice at lower Mhz 1369-6-9-6-21 35-36 rtls but not 32m stable with quick test
    Is a kit of 2000 cl6 Pi 3x2Gb
    [​IMG]
     
    Last edited: Oct 13, 2014
  19. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    finally 54.828 @ 5Ghz little waza,should improve on this with bigger waza
    [​IMG]


    Some Cl5
    [​IMG]

    More Cl5
    [​IMG]
     
    Last edited: Oct 19, 2014
  20. Bullants

    Bullants Member

    Joined:
    Aug 16, 2009
    Messages:
    1,661
    Location:
    Australia
    Just checked PCCG and now they have removed the gskill 3000 cl15 looks like they won't stock them no more,have to source memory from somewhere els :)
     

Share This Page