Discussion in 'Extreme and Water Cooling' started by Draebor, Oct 15, 2014.
Chaddy, but you can get the black one from Scorptec (TT though )
Thermaltake ones are too fat. Measuring the EK ones are almost 23mm wide. TT spec says they are 22mm so prob too big :*(
you need me measure mine one?
My brother in law actually lives in Cheltenham. I'm thinking he owes me a favor lol
Can you PM me your address and mobile. Also what time would suit you?
Nah all good mate I think Kommandant's will suit better and I can get my brother inlaw to pick them up. He is coming my way tomorrow so it works out pretty good. Thanks very much for the offer.
Got to love OCAU!
Thanks everyone. Hopefully be up and running tomorrow night.
Anyoone got some M4 30mm radiator screws?
I bought a corsair radiator off the forum a while ago, and it came with 2 packets of screws, which seem to be too thin, and do not screw in at all. both small and long screws.
want to get this system up and running 2night but cant without these screws.
Any help will be appreciated. can pickup melb.
Is it M4 for the threads? Need to get some counter sunk screws for my EK rad as I dont have clearance for panheads in my SFF case.
they might be 6-32 threads? or m3 seems to be the other one i see around a bit. there are fastener places on ebay that will have the right lengths in various head styles...
/roots around in google
ah, yep, here you are - for EK they are 6/32s https://www.ekwb.com/shop/screw-set-unc-6-32-30mm-20-pcs
downside of shopping with EKWB.... just the screws comes to 31.27 for DHL package with tracking (!!) for a grand total of 42.85.....(unless you want it express at which point shipping becomes 60 bucks..!) think you are best off looking at ebay haha....
Thanks for looking that up mate. I'll track down some 6-32 counter sunk screws. I have to counter sink my Chromax noctuas so thats going to hurt my soul a little haha.
took a look cos i was after similar bolts recently. sadly cos of your countersunk needs it will be tricky... philips head only, no hex countersunks available over 25mm i could see. only looked on shore, and that got me this outfit in brisbane (think ive used em before too)
6-32 1-1/4 " (31.75mm long) philips head countersunk in stainless, at 6.30 for a 10 pack, 90c less for 5 and 90c more for 20. no black coating is available on longer than 1" either. i didnt try a google search cos invariably it will spit back international orders which may be a time constraint for you.. but if a socketed csk head or black bolt are what you want that will be where you have to go.
/edit: just checked and it seems corsair rads are 6/32 as well. so same goes for nCrypt, but might be more bolt choice if you dont have to do counntersunk.
Was going to recommend that mob, have bought from them in the past as well. I'll dig around since i think i actually have some of those spare but probably not countersunk.
Hoping to find anyone who might have two g1/4 to 10mm or 13mm barb fittings and some spare tubing hoses lying around in Melbourne? Just need it for a little side project and will return it afterwards.
Hoping to find someone with a 160mm rad!
In regards to the screws... You could always tap an M4 thread in instead... Then you should get better screw choices
I have an eibwolf gpu block pump for a vega card I don't need if anyone wanted to make their own aio
Does anyone have any slim line 'end plugs' they want to part with? The one i have is too tight a fit to fit next to my inlet pipe..
I have just one but you can have it for free. It has some surface corrosion and 2mm clear of the thread as seen in the photos.
did you get something? got a some if you need.
anyone got a 92mm slim radiator and dual 80mm radiator?